What is Towing Capacity of 2019 Lexus RX 350

Question

Question:

I purchased a Lexus RX 350 and I want to use it to tow my trailer home. Do i need to change to harder suspension strut to handle the load ?

asked by: Nez H

0

Expert Reply:

I did some checking and it looks like your 2019 Lexus RX 350 has a towing capacity of 3,500 lbs. As long as your trailer weighs less than that you are totally fine and would not need to upgrade anything on the vehicle.

If you need a trailer hitch the one I recommend is the Stealth part # 391LXRX16T because it has the best towing capacities and once installed gives you the cleanest look since only the hitch opening hangs below the bumper.

expert reply by: Jameson C

0

click to enlarge

Answer 1

To add a wiring harness to your 2022 Lexus RX 350L you will need the Tekonsha Upgraded Modulite Vehicle Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit item #C59236. This is the only wiring harness available for your Lexus since…

view full answer...

Answer 2

It appears TMW is a overseas company which I could not find much information. The 46210 is a common hub number for a 3,500lb idler hub with 5 on 4-1/2" bolt pattern. This would use either the Idler Hub #AKIHUB-545-35-G-K for standard spindles or…

view full answer...

Answer 3

The Draw-Tite item #DT73QR installs below the bumper. This hitch is perpetually backordered due to Draw-Tite being bought out so I have a way better option for a hitch for your 2023 Lexus RX 350. I recommend the Curt Trailer Hitch item #C29VV. This…

view full answer...

Answer 4

In order to add a trailer wiring harness to your 2020 Lexus RX 350L you'll want to use the Curt #C56217.

view full answer...

Answer 5

The connector for the #118252 is located behind the rear bumper of the vehicle, just a bit left of the rear bumper centerline. The photo I produced will show the location. Before purchasing the #118252, confirm the presence of the connector. You…

view full answer...

Answer 6

I did some checking and your 2018 Lexus RX350 has a 3,500 lb towing capacity so yes it could tow the trailer you mentioned as long as it for sure would weigh less than 3,500 lbs. For a hitch the etrailer #e94AR would be a really great option. We…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

What is Towing Capacity of 2019 Lexus RX 350

Continue Researching