7-Way Trailer Wiring Kit for 2015 Mercedes-Benz Sprinter

Question

Question:

In my case I am not replacing a damaged factory connector. My van never had trailer lights. Is this kit appropriate?

asked by: Gwyn

0

Expert Reply:

Yes, the Tekonsha 7-way kit part # TK22115 is exactly what you need. It is a 7-way kit designed to fit your 2015 Mercedes-Benz Sprinter that did not have the factory connector. This is what you'd need for a new install that didn't have any trailer wiring currently.

expert reply by: Jameson C

0

Answer 1

The Tekonsha OEM Replacement Vehicle Wiring Harness part #TK22115 is a great option for a 2017 Mercedes-Benz Sprinter 2500. It as you noted has a 7-way plug but there isn't a complete harness with both 4 and 7-way plugs as is. Therefore, I…

view full answer...

Answer 2

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 3

Yes, we do sell a hitch that is compatible with the factory step bumper on your 2020 Mercedes-Benz Sprinter 2500. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item #75601. This hitch is custom fit and designed to fit the 144WB of your…

view full answer...

Answer 4

We do not recognize this connector that you have provided a picture for but we have a solution. We do not have an adapter to go between that plug and a 7-way connector. However you can create your own 7-way jack for your trailer to plug into. You…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

7-Way Trailer Wiring Kit for 2015 Mercedes-Benz Sprinter

Continue Researching