Vent Lid and Operator Recommendation for Trailer Roof Vent that Blew Off

Question

Question:

Our vent lid blew off taking the piece that the vent lid slides into. Do u sell the piece that attaches to the body? The vent slide has nothing to slide into to mount to rv

asked by: Vincent

0

Expert Reply:

Based on your picture the only solution we have is a new operator like with part # BV0115-04 with a new lid like part # BV0554-01. Just the one piece you need for your current operator arm is not available.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hey Scott, The lift arm you mentioned is not compatible with the #BV0554-01 vent cover. The lift arm you are going to want to pair with that is the #BV0554-01 lift arm. These 2 are compatible and will work well as a replacement. What kind of trailer…

view full answer...

Answer 2

It does look like you need vent lid #BVD0449-A01. For the knob only you would need #BVD0421-15. And for the whole arm assembly with knob use #BV0115-04.

view full answer...

Answer 3

Hey Ed it does not look like we have anything that matches the dimensions you gave me. The Replacement Operator item #BV0115-04 does work with the Ventline item #V2110SP-24 but it looks like it is going to be too short. The center mounting hole to…

view full answer...

Answer 4

We carry two different replacement operator and knob assemblies for the Ventline trailer roof vents. The operator you referenced, #BV0115-04, will work with vent covers that have either a slot or a slotted bracket for the end of the operator arm to…

view full answer...

Answer 5

I went out to the warehouse and measured a Replacement Operator w/ Knob and Screw, #BV0115-04. The center to center distance between the mounting holes is 2-3/8 inches. It is designed as a replacement for Ventline Ventadome Trailer Roof Vent,…

view full answer...

Answer 6

The distance between the bolt holes for the Replacement Lift Arm #FVK8011-05 is 2-15/16" on center. The arm itself measures 6-5/8" long. I have attached some pictures for you to reference as well.

view full answer...

Answer 7

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008, please…

view full answer...

Answer 8

The Replacement Gear Motor with Pinion Gear #BVB0601-00 is the correct replacement for the Ventline Ventadome roof vent model V2119. It sounds like you also need the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents…

view full answer...

Answer 9

The MaxxAir Standard RV trailer roof vent part #MA00-933066 is designed to fit standard RV roof vents like the MaxxFan part #MA00-04301M that you referenced.

view full answer...

Answer 10

The Ventline product you reviewed, part #V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank…

view full answer...

Answer 11

The correct replacement cover for your Ventline Northern Breeze VB0568 Roof Vent is the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BV0554-01 for white, or #BV0554-03 for smoke. I have attached a couple of videos for you to…

view full answer...

Answer 12

Thank you for providing the pictures. The Fan-Tastic Vent Replacement Lift Arm for Roof Vents with Flat Lids item #FVK8014-05 replaces the flat roof vent arm on Fan-Tastic Vents. If you have a Domed shape Fan-Tastic vent you will need the Replacement…

view full answer...

Vent Lid and Operator Recommendation for Trailer Roof Vent that Blew Off

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching