Bolt Hole Distance and Arm Length for the Replacement Lift Arm # FVK8011-05

Question

Question:

The other parts like this on you die have measurements. This one doesnt. Can you provide the measurements. The measurement from screw hole to screw hole sends the length of the arm.

asked by: Wilbur E

0

Expert Reply:

The distance between the bolt holes for the Replacement Lift Arm # FVK8011-05 is 2-15/16" on center. The arm itself measures 6-5/8" long. I have attached some pictures for you to reference as well.

expert reply by: Jon G

0

click to enlarge

Answer 1

Hey Scott, The lift arm you mentioned is not compatible with the #BV0554-01 vent cover. The lift arm you are going to want to pair with that is the #BV0554-01 lift arm. These 2 are compatible and will work well as a replacement. What kind of trailer…

view full answer...

Answer 2

It does look like you need vent lid #BVD0449-A01. For the knob only you would need #BVD0421-15. And for the whole arm assembly with knob use #BV0115-04.

view full answer...

Answer 3

The motor you need is the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts - White #FVK6010-81 or off-white #FVK6010-80. If you need the lift arm assembly then you will also want #FVK8011-05. I've attached…

view full answer...

Answer 4

Based on your picture the only solution we have is a new operator like with part #BV0115-04 with a new lid like part #BV0554-01. Just the one piece you need for your current operator arm is not available.

view full answer...

Answer 5

We carry two different replacement operator and knob assemblies for the Ventline trailer roof vents. The operator you referenced, #BV0115-04, will work with vent covers that have either a slot or a slotted bracket for the end of the operator arm to…

view full answer...

Answer 6

Hey Ed it does not look like we have anything that matches the dimensions you gave me. The Replacement Operator item #BV0115-04 does work with the Ventline item #V2110SP-24 but it looks like it is going to be too short. The center mounting hole to…

view full answer...

Answer 7

I went out to the warehouse and measured a Replacement Operator w/ Knob and Screw, #BV0115-04. The center to center distance between the mounting holes is 2-3/8 inches. It is designed as a replacement for Ventline Ventadome Trailer Roof Vent,…

view full answer...

Answer 8

If the vent you have installed on your trailer has a 4-point hinge like the attached photo, part #BVD0449-A01 would be the replacement lid for your Ventline roof vent. We do not offer a metal replacement lid with a 4-point hinge. The replacement knob…

view full answer...

Answer 9

We have two options of replacement vent covers for the V2094 model, the white dome assembly, #BVD0449-A01, and the #BVD0449-A03 for smoke. These work for Ventline Ventadome roof vent models V2092, V2094, V2119, and V2128 after 2008. Pre 2008, please…

view full answer...

Answer 10

The Replacement Gear Motor with Pinion Gear #BVB0601-00 is the correct replacement for the Ventline Ventadome roof vent model V2119. It sounds like you also need the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents…

view full answer...

Answer 11

The MaxxAir Standard RV trailer roof vent part #MA00-933066 is designed to fit standard RV roof vents like the MaxxFan part #MA00-04301M that you referenced.

view full answer...

Answer 12

The Ventline product you reviewed, part #V2092SP-28, is a complete vent assembly intended for a rough roof opening of 14-1/4 x 14-1/4 inches. It consists of a wedge-shaped white plastic dome attached to a galvanized steel frame with hand-crank…

view full answer...

Bolt Hole Distance and Arm Length for the Replacement Lift Arm # FVK8011-05

Product Page this Question was Asked From

Continue Researching