Is a Lift Spacer Required for Air Lift Airbags on a Lifted 2017 Ford F-250

Question

Question:

I would like to add these to my 2017 F250. However I have a stage 2 procom 6” lift installed. I looked at the spacers that airlift sells but I don’t think I will need these? Is there anything specific I need for my truck?

asked by: David C

0

Expert Reply:

Thank you for the photo! In your case, you are correct in that you will not need a lift spacer to install the Air Lift LoadLifter 7500 XL Air Helper Springs part # AL57577 on your 2017 Ford F-250 as the distance between the contact point and jounce spring has not changed. This is the case for most newer Ford trucks with lift kits installed.

In order to take full advantage of these airbags you might also want to consider an air compressor system like the Air Lift WirelessAIR Compressor System for Air Helper Springs part # AL74000. I like this system in particular because it has a wireless controller which means you don't have to run any airlines into the cab.

I have attached a sample install video on the air compressor system for you as well.

expert reply by: Conner L

0

click to enlarge

Answer 1

You will need to determine if your 2021 Ford F-450 is a Super Duty model or a cab and chassis model. If you are unsure you can check the tag inside your door as a cab and chassis will state "Incomplete Vehicle Manufactured By Ford" on the…

view full answer...

Answer 2

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 10

Hey Cory, Air springs are going to be the best at leveling your F-350 back out once the weight is added but they will most likely affect your unloaded ride quality, even when aired down. That being said, a majority of the unloaded ride quality…

view full answer...

Answer 11

Hey Bob, congrats on a setting up a new camper! Out of all of those options you'll also need to consider daily driving comfort unless that camper is a permanent addition to your truck bed. Listed below are a brief breakdown of each and a…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Is a Lift Spacer Required for Air Lift Airbags on a Lifted 2017 Ford F-250

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching