What Size Spare Wheel/Tire Can be Used with Draw Tite Hitch Installed on 2019 Dodge Durango

Question

Question:

Will this hitch work if I have a full size 20” spare underneath? I’ve seen a few that say 18” and for the spare

asked by: Donny

0

Expert Reply:

All of the trailer hitches we offer for your 2019 Dodge Durango including the Draw Tite # 75713 require the spare wheel size to be 18 inches in diameter or less. You'd have to track down a smaller spare if you wanted to use this hitch.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The best towing setup for your 2017 Jeep Grand Cherokee is the Draw-Tite Trailer Hitch #75699, the Curt T-Connector #C55774, and the Redarc Tow-Pro Elite #RED44FR. The reason I the Draw-Tite #75699 is the best is because it features a hidden…

view full answer...

Answer 2

The torque specs for the Draw-Tite #75713 are noted in the installation instructions, which I've linked to this answer. I've also linked an installation video of this hitch for you to check out.

view full answer...

Answer 3

The torque specs will be dependent on the trailer hitch itself not based on the vehicle. These torque specs should be outlined in the installation details for your specific hitch. For instance, on your 2017 Chevy Silverado 1500, if you have the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

What Size Spare Wheel/Tire Can be Used with Draw Tite Hitch Installed on 2019 Dodge Durango

Featured Help Information

Miscellaneous Media

Continue Researching