Should Caliper Guide Bolts of Kodiak Disc Brake Kit Touch Brake Rotor
Updated 07/31/2023 | Published 07/30/2023
Question:
Are the caliper guide bolts supposed to contact the back of the rotor surface when installed and torqued to 40-50 ft/lbs? Referencing part #: K2HR35D for the Kodiak 225 calipers and 10” rotor/hub assembly
asked by: Brandon
0
Expert Reply:
The caliper guide bolts are not supposed to contact the rotor surface when they are installed.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Shop: Replacement Grease Cap for Dexter/Tie Down Engineering Vortex Trailer Hubs
- Search Results: kodiak brake pads
- Shop: Kodiak Ceramic Brake Pads - 7,000 lbs to 8,000 lbs
- Q&A: Kodiak Caliper-Mounting Guide Bolt Replacement Sleeve for Model 250 Caliper
- Q&A: Bearings and Seal for Replacing UFP Dexter 41062 Hub with Kodiak Hub and Rotor
- Q&A: Replacement Sleeve for Kodiak Model 250 Caliper
- Video: In-Depth Review of the Replacement Sleeve for Kodiak Caliper-Mounting Guide Bolt
- Video: Review of DeeMaxx Replacement Caliper Bolt and Sleeve Assembly - DE85FR
- Shop: Replacement Guide Bolt for Kodiak Calipers - Stainless Steel
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 9/16" Bolts - 7,000 lbs to 8,000 lbs
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Dacromet - 8,000-lb Dexter Axle
- Shop: Replacement Guide Bolt and Sleeve Assembly for DeeMaxx 3,500-lb to 8,000-lb Disc Brakes
- Shop: Kodiak Wheel Bolt - 1/2" Diameter x 2" Long
- Video: In-Depth Review of the Replacement Mounting Bracket for Kodiak Disc Brake Caliper
- Search Results: kodiak 250 caliper
- Video: What to Know About the Kodiak Ceramic Brake Pads
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: What is the Difference Between the Kodiak Disk Brake Kits K2R35DKG and K2R35DS?
- Q&A: How to Pick Out Replacement Hubs for a Boat Trailer
- Q&A: Recommended Parts To Convert Drum To Disc Brakes On EZLoader Trailer With 3,500 Lb Axle
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle