Largest Available Battery Heater

Question

Question:

Whats the largest battery heater available?

asked by: Coop

0

Expert Reply:

We have a large selection of battery heaters, which I have linked below, that are designed to work with certain size/model batteries.

In terms of physical size the largest heating pad style heater we have is the Kat's # KH22600 which measures 18 inches long, 11 inches wide, and is designed for Series 8D automotive batteries. For a thermal wrap style heater the largest we have is the Kat's # KH22300 that has a 72 inch length. It is designed for diesel automotive batteries.

If you can tell me what size battery you have I will be happy to make a specific recommendation.

expert reply by: Chris R

0

Answer 1

We do have battery heaters that will work for lithium batteries, though the only options we offer do require the wrap be plugged into a standard outlet, and are for use when the outside temperature is below freezing. If you have access to an outlet…

view full answer...

Answer 2

Hello Randall. The Roof membrane that comes with the LaSalle Bristol Xtrem 40’ long kit #344270KIT40 is 40' long and 9-1/2' wide. The material thickness is 27 MIL which is about 0.68 mm thick.

view full answer...

Answer 3

From what you have described as your goal, my suggestion is one of two primary options, and I will note here that with either option I suggest you have a battery bank of at least 400 AH when fully charged. This first option is not an automatic…

view full answer...

Answer 4

Generally for RV Plugs a 4 wire would mean 50 amp. Unless someone made modifications to your 5th wheel at some point, I cannot think of a reason why there would be a 4 wire 30 amp plug. Usually we can look at the cord to determine if your 5th wheel…

view full answer...

Answer 5

Yes, you can keep the Kat's Heaters Thermal Battery Wrap #KH22300 plugged in for an extended period of time like you mentioned.

view full answer...

Answer 6

I might have a solution for you, but we don't have custom hitches for ambulances. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body (ambulance) truck like yours are multi-fit RV hitches…

view full answer...

Answer 7

I do have an option for you but ambulances are built on an E-Series chassis, none of the trailer hitch options for this application have the needed receiver tube drop. Therefore, I recommend Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver…

view full answer...

Answer 8

We have the Titan tire chains part #TC4219CAM which are a fit for the tire size you have on your Sprinter of 215/85-16 and would work great. These are a twist link style of chain which means it would be a little smoother and these are a dually design…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Jeff, you'd have to go with a universal hitch like the Curt part #13703 that you referenced which can basically fit all frame styles that are between 22 and 72 inches apart. It has a towing capacity of 3,500 lb as well.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Largest Available Battery Heater

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching