Replacement BOLT Replacement Lock Cylinder for 2015 Toyota Tacoma

Question

Question:

will this code to a 2015 Toyota Tacoma?

asked by: Teke D

0

Expert Reply:

Yes, the BOLT Replacement Lock Cylinder # BL7023482 will code to the ignition key for your 2015 Toyota Tacoma. I have attached an image below of the compatibility chart for this particular cylinder and it lists all models of the 2015 Tacoma as a confirmed fit.

expert reply by: Chris R

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 6

Hey Eric, so we do have what you need with the replacement cap part #VA55JR but the one you mentioned is smaller so it would not work for you. The cap you need is 4 inch diameter and the one you referenced is 3.75 inch.

view full answer...

Answer 7

Thanks for reaching out, Hal! That's a really good question. Based off what I could find, if the old cylinder worked with your ignition key you would want to get part #BL692918. I included the ignition key compatibility diagram below for you. You…

view full answer...

Answer 8

Hi Josh; this can get pretty confusing with the E-Series since the manufacturer doesn't officially list or update fitment for their wiring harness on the cutaway. However, I can confirm the Tekonsha Prodigy P2 #TK49UR comes with the wiring…

view full answer...

Answer 9

Yes, you are correct. In order to correctly take this measurement you will need to measure from the center of the spindle to the center of the main axle tube. I have included a picture for reference.

view full answer...

Answer 10

I have a few options for you to help with identifying the axle capacity on your trailer. The first and easiest method is simply by crawling under the trailer and looking for the axle tag on the center of the beam. Depending on age, the axle capacity…

view full answer...

Answer 11

I believe you are referring to something like the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers #PAL9555 which adds a power lock to the ARE camper shell on your 2016 Ford F-250. The only other thing that you might be…

view full answer...

Replacement BOLT Replacement Lock Cylinder for 2015 Toyota Tacoma

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching