Replacement Curt Weight Distribution Chain Lift Brackets

Question

Question:

How can I find out what we system I have to order correct pop up brackets? It is a curt 10k chain system.

asked by: Brett S

0

Expert Reply:

The frame-mount lift brackets from a Curt weight distribution system are not weight rated so one kit works for all chain-type systems. For replacement chain hangers use part # C17208 that you referenced.

We also offer bolt-on hanger kit # C17005 which is helpful when the trailer frame dimensions do not allow using the clamp on kit # C17208. These require drilling for installation and the hardware to mount them is included. The photo included for you shows how these bolt on.

expert reply by: Adam R

0

click to enlarge

Answer 1

Hey Craig, I have just the solution you are looking for with the bolt on Curt weight distribution chain hangers part #C17005. You would bolt these to the sides of your trailer frame under the V-nose and you'd be able to use the spring bars of…

view full answer...

Answer 2

The Curt Weight Distribution systems part #C17052 and C17002 brackets fit frames that are 2-3/4" wide so you will not have an issue with the brackets fitting your frame. Curt does not specify bracket placement for MV weight distribution systems…

view full answer...

Answer 3

When using the bolt brackets #C17005 you will have to use the trailer jack to lift both the trailer and the tow vehicle to be able to put the spring bar on or take them off. Since the bolt-on brackets do not have lift assembly like the normal…

view full answer...

Answer 4

The spring bars that come with the Curt MV Weight Distribution System part #C17052 are 31-1/2" long.

view full answer...

Answer 5

Hey Robert, thanks for reaching out! The 10K Curt Short-Arm Weight Distribution System with Sway Control #C17322 is going to have arms that sit closer to the coupler than pretty much every other weight distribution system on the market. With this…

view full answer...

Answer 6

I went out to the warehouse and pulled Curt chain hanging brackets #C17003 to take some measurements. There are 2 sets of bolts included. The short set is 1/2-13 x 2 inches and the longer set is 1/2-13 x 3-1/2 inches. The brackets measure 4 inches…

view full answer...

Answer 7

I may have a solution for you on this, but you're not going to be able to use the Curt #C17501 in the manner you've mentioned since the brackets will need to be 4" from the end of the spring bars to provide proper leverage to the system.…

view full answer...

Answer 8

Using a different chain hanger bracket like #C17003 or #C17005 (that bolt on) for a weight distribution system may mean that the number of chain links will change. In this case the number of links does not matter; what matters is that the system be…

view full answer...

Answer 9

With Curt Short Arm weight distribution systems like the part #C17322 that you referenced the distance from the center of the hitch ball to the far edge of the chain hanger will be 30-5/8 inches. A lot of times the best solution for V-nose trailers…

view full answer...

Answer 10

Yes, the offset lift brackets listed in the manual for the Curt MV Weight Distribution Systems like part #C17063 are the Chain Hangers for Curt Weight Distribution Systems part #C17005 which bolt to the side of the trailer frame. If you cannot mount…

view full answer...

Answer 11

Yes, you will need to use your trailer jack to jack up both the trailer and the rear of your vehicle so that you can attach the chains of your weight distribution system to the hangers #C17003 that you referenced. I attached an FAQ on weight…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Curt Weight Distribution Chain Lift Brackets

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching