How To Obtain the Offset Lift Brackets for a Curt MV Weight Distribution System
Updated 10/09/2019 | Published 10/08/2019
Products Featured in This Question
Question:
I have the manual, it says that if the lift brackets have an obstruction in the area where the need to be, to order an offset bracket kit. I cant find that kit anywhere, is it called something else or am I out of luck?
asked by: Dustin H
Expert Reply:
Yes, the offset lift brackets listed in the manual for the Curt MV Weight Distribution Systems like part # C17063 are the Chain Hangers for Curt Weight Distribution Systems part # C17005 which bolt to the side of the trailer frame. If you cannot mount the clamp-on lift brackets on top of the frame due to obstructions then these bolt-on lift brackets are your only option.
Product Page this Question was Asked From
Curt Round Bar Weight Distribution System w/ Friction Sway Control - 14K GTW, 1.4K TW
- Weight Distribution Hitch
- WD With Sway Control
- Round Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Requires Disconnection
- 1100 lbs
- 1200 lbs
- 1300 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Andersen Weight Distribution Hitch w Sway Control - 8" Drop/Rise - 14K GTW, 1.4K TW
- Shop: Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW
- Video: Breaking Down the Chain Hangers for Curt Weight Distribution Systems
- Shop: Curt Round Bar Weight Distribution System w/ Friction Sway Control - 14K GTW, 1.4K TW
- Shop: Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Shop: Clamp-On Lift Brackets for Blue Ox SwayPro Weight Distribution Systems
- Shop: Replacement Hook Up Brackets for Curt Weight Distribution Systems
- Shop: Andersen Weight Distribution Hitch w Sway Control - 6" Drop/Rise - 10K GTW, 1.4K TW
- Search Results: 7 way trailer connector
- Search Results: weight distribution hitch accessories and parts
- Search Results: trailer steps
- Search Results: weight distribution hitch parts
- Search Results: ce smith trailer steps
- Shop: Trailer Wiring
- Search Results: weight distribution
- Search Results: 7 way to 4 way
- Video: Curt Weight Distribution C17508 Review
- Q&A: SoftStartRV Soft Start Wiring for Dometic Brisk Air Wiring Diagram
- Shop: Trailer Hitch
- Q&A: Does the Trailer Need to Be Jacked Up to Install Chains on Chain Hangers # C17003
- Q&A: Weight Distribution System that Allows For Bracket Placement 35 Inches Behind Hitch Ball
- Q&A: How to Install Spring Bars Using Bolt On Brackets for a Curt Weight Distribution System
- Q&A: Bolt Sizes and Bracket Dimensions of Chain Hangers for Curt Weight Distribution Systems
- Q&A: Replacement Curt Weight Distribution Chain Lift Brackets
- Q&A: Troubleshooting Surt Chain Hangers Not Having Room to Fit on Trailer Tongue
- Shop: Suspension Enhancement
- Video: Review of Curt Weight Distribution Hitch - WD Only - 17302