Can Curt Weight Distribution System be Used with V-Nose Trailers
Updated 10/22/2025 | Published 04/02/2025
Products Featured in This Question
Question:
I bought a Curt 17057 weight distribution hitch from you. Is there a short bar i can use on this or can I re drill holes and make shorter? trying to use on a v nose trailer.
asked by: Craig H
Expert Reply:
Hey Craig, I have just the solution you are looking for with the bolt on Curt weight distribution chain hangers part # C17005. You would bolt these to the sides of your trailer frame under the V-nose and you'd be able to use the spring bars of your Curt weight distribution system part # C17057. Since these do not require clearance above the frame like bolt on hangers do this would solve your problem. Worth mentioning is there isn't shorter spring bars available.
(click to enlarge)
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD Only
- Round Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Requires Disconnection
- 1100 lbs
- 1200 lbs
- 1300 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: ce smith trailer steps
- Search Results: trailer steps
- Search Results: weight distribution hitch accessories and parts
- Search Results: weight distribution hitch parts
- Video: Breaking Down the Chain Hangers for Curt Weight Distribution Systems
- Video: Curt Weight Distribution C17508 Review
- Shop: Flint Hill Goods Adjustable Wheel Chock - 7-1/8" Wide Tires - Steel
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Video: What to Know About the Curt Weight Distribution Shank for 2.5" Hitches
- Search Results: race 28521 trailer bearings races seals caps
- Q&A: Troubleshooting Surt Chain Hangers Not Having Room to Fit on Trailer Tongue
- Shop: Chain Hangers for Curt Weight Distribution Systems - Bolt On
- Q&A: Using Curt Short Arm Weight Distribution System on V-Nose Trailer
- Q&A: How to Install Spring Bars Using Bolt On Brackets for a Curt Weight Distribution System
- Q&A: Bolt Sizes and Bracket Dimensions of Chain Hangers for Curt Weight Distribution Systems
- Q&A: Replacement Curt Weight Distribution Chain Lift Brackets
- Q&A: Weight Distribution System that Allows For Bracket Placement 35 Inches Behind Hitch Ball
- Q&A: Does the Trailer Need to Be Jacked Up to Install Chains on Chain Hangers # C17003
- Shop: Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW
- Shop: Curt Round Bar Weight Distribution System w/ Friction Sway Control - 14K GTW, 1.4K TW
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control for 2-1/2" Hitch - 20K GTW, 2K TW
- Shop: Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Search Results: andersen rapid hitch
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Weight Distribution Hitch
Jameson C.
10/22/2025
Hey Craig, how did things go with the bolt-on Curt chain hangers under your V-nose trailer? Your results could really help others trying to make a similar setup work.