Increasing Trailer Tire Size for Better Load Capacity & Higher Speed Rating
Updated 01/28/2019 | Published 01/25/2019
Question:
I have a load rite jetski trailer that has 4.80x12 on it and I want to go to a 15in wheel due to alot of highway travel I want to slow the hub bearings down and go to a radial to try and avoid blowouts. Is this possible with minor mods to fenders or am I looking at axle replacement?
asked by: Ryan W
Expert Reply:
You may simply need to choose new tires in the same size but ones that have a higher weight capacity and/or a higher speed rating. For instance, the Taskmaster 4.80R12 Radial Trailer Tire with White Spoke Wheel # TA98RR has a Load Range C weight rating and a speed rating of M, meaning it is rated for up to 81-mph.
Switching to a larger size of trailer tire is sometimes possible. You need to have enough vertical clearance within the fenders/wheel wells and enough lateral clearance between the inner sidewall and the trailer frame. Normal vertical suspension travel for a leaf spring trailer suspension is 3 to 4 inches and I suggest maintaining at least 3/4-inch space between the inner sidewall and the frame. You may need to also swap out your hubs to allow use of larger rims.
Be sure to always run your trailer tires at their maximum rated psi pressure (also noted on the sidewall) and to observe their weight and speed ratings too. Incorrect inflation, overloading beyond capacity and driving faster than the tire is rated to go ALL cause excess heat, and heat is the root cause of most tire failure.
I linked two helpful articles concerning special trailer tires. These will address any remaining questions and will also help with determining the overall diameter of the most popular sizes of trailer tire. Please feel free to tell me more about your current tires.
Product Page this Question was Asked From
Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel - 4 on 4 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 175/80-13
- 13 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: CE Smith Spare Tire Mount for Trailers - Steel - 4- and 5-Lug Wheels - 8-3/8" Long
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Q&A: Recommended Replacement 4.80x12 Wheel/Tire With Higher Speed Rating for Harbor Freight
- Q&A: Tire Size Upgrade from 4.80-12 on Trailer
- Q&A: Looking For 4.80-12 Tires That Have A Speed Rating Higher Than 55 mph
- Q&A: Recommended Wheel/Tire Upgrade for a 4.80-12 Tire On a Jet Ski Trailer
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: SeaSucker Pro Series Rod Holder - Vacuum Mount - White - 3 Rods
- Shop: SeaSucker Rod Holder - Vacuum Mount - White - Vertical
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer jack
- Search Results: spare tire mount
- Shop: Gooseneck Hitch
on Trailer Tires and Wheels
