Diameter of Holes on Fastway e2 Weight Distribution Shank part # FA92-02-4214

Question

Question:

Does the fastway e2 FA92-02-4214 shank have 3/4 inch holes for mounting the hitch ball mount assembly?

asked by: Jack A

0

Expert Reply:

Yes, the Fastway e2 Weight Distribution Shank part # FA92-02-4214 that you referenced does have the standard 3/4 inch diameter holes that are 1-1/4 inches apart. This shank fits nearly all standard weight distribution heads from a variety of brands like Curt, Reese, Pro Series, Equal-I-Zer, Husky etc.

expert reply by: Jameson C

0

Answer 1

Fastway is made by the same company as Equal-i-zer; The Fastway brand is an entry level company and the Equal-i-zer is the higher line. So the Equal-i-zer Weight Dist Shank #EQ90-02-4300 is essentially the same as the Fastway e2 Weight Distribution…

view full answer...

Answer 2

The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA94-00-0600 will allow you to use the Fastway e2 Weight Distribution Shank #FA92-02-4214 to get the extra clearance you desire without compromising the capacity at all.

view full answer...

Answer 3

The Fastway e2 Weight Distribution Shank #FA92-02-4213 is a great option, but if you're needing a little more drop then I recommend picking up the Shank #FA92-02-4214 instead because it offers an additional 2" of drop so you can achieve the…

view full answer...

Answer 4

Hey David. For your 2012 Lance 1685 Travel Trailer, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item #FA92-00-0800. Your Lance 1685 tops out at 5,400 lbs so this should put your tongue weight around 540 lbs - 810 lbs…

view full answer...

Answer 5

Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…

view full answer...

Answer 6

Hey Andrew, the Fastway e2 system part #FA92-00-0800 would be a great option for a weight distribution system and sway control for your 2022 Forest River Cherokee Alpha that has a 720 lb tongue weight. Have you used WD systems before?

view full answer...

Answer 7

Hi Mark! I looked up the specs for a 2025 Airstream Trade Winds 23FBQ and the fully loaded maximum tongue weight it will have is 600 pounds. We have some good options for that weight capacity, like the Fastway e2 Weight Distribution w/ 2-Point Sway…

view full answer...

Answer 8

All of the Replacement Round Spring Bars for the Fastway e2 Weight Distribution systems, #FA94-02-1099, #FA94-02-0899, and #FA94-02-0699, measure 31-1/2 inches long. The diameter of the bar at the upper end is 1.39 inches, and the inside groove…

view full answer...

Answer 9

The correct replacement hardware kit for your Fastway e2 4.5k system is the Replacement Hardware Kit for Fastway e2 Weight Distribution Head #FA92-02-9600. The Replacement Bolts for Equal-i-zer Weight Distribution Head #EQ90-02-9400 you asked about…

view full answer...

Answer 10

The Replacement Bolts for Fastway e2 Weight Distribution Head part #FA92-02-9600 come with the following: (2) 3/4-10 x 5" grade five bolts (4) 3/4 conical-toothed washers (1) hitch pin (1) hitch pin clip, (1) spacer rivet (7) spacer washers (2)…

view full answer...

Answer 11

Yes, the AirBedz Rear Seat Air Mattress, #341028 would be great for a dog. However, I suggest placing a blanket over the top of it.

view full answer...

Diameter of Holes on Fastway e2 Weight Distribution Shank part # FA92-02-4214

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching