Brakes and Hubs for Rockwell American 7000lb Torsion Trailer Axles

Updated 01/22/2019 | Published 01/21/2019

Products Featured in This Question

Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased

(1098)

$290.18

Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K

(1741)

$417.64

Question:

Hey E- trailer, I have two 7K Rockwell American brand torsion axles on a pj deckover gooseneck. - 8 on 6.5inch lug spacing - 9/16inch wheel stud - 12inch x2inch brake assembly. 5 bolt mounting - 1.75 inner race, 1.25inch outer race - electric brakes - ez- lube fitting on end of spindle I am looking for 4 new brake assemblys and also 4 new drums for this setup. So far I have found kits 23-464-465 for brakes and 8-219-13UC3 for drums I would Like to stick with dexter parts if possible. Let me know if I am in the right direction to order them up. Thanks

asked by: Evan E

Helpful Expert Reply:

The two part numbers you mentioned are exactly the two Dexter part numbers you'd want! The brake assemblies part # 23-464-465 are a pair of self adjusting brake assemblies with a 7k capacity and then for brake/hubs you'd want the part # 8-219-13UC3.

expert reply by: Jameson C