Scissor Jack Stabilizer Jack Compatible with 8,000 lbs

Question

Question:

Is there any scissor jack with a LIFT capacity of 8000 lbs?

asked by: Pascal

0

Expert Reply:

Scissor jacks are stabilizing jacks and not intended for lifting. Their rated capacity is only for stabilizing. We have kits with capacities above 8,000 lbs but the largest support capacity for a single jack is the Ultra-Fab Ultra Scissor Jack - 24" Lift - 6,500 lbs # UF48-979006 or the 30 inch lift # UF48-979032.

So if you use one on each side of your trailer that gives you a 13,000 lb support capacity at that location since you wouldn't put it on one side and not the other.

expert reply by: Jason S

0

Answer 1

It sure is Steve and welcome back! The etrailer Sidewind Trailer Jack w/ Drill Adapter item #e88GV is the correct jack if you don't want the SnapPad. This one is designed to fit the standard bolt pattern of an A-Frame trailer coupler and can be…

view full answer...

Answer 2

Hey Jeff! Your thinking is mostly correct. The Autowbrake Electric Brake Controller #3430001 mounts on the trailer and uses your vehicle's brake light signal from the 4-way to know when you're braking. However, it also needs a constant…

view full answer...

Answer 3

Hey Marcus! That's unfortunate, but yes, that is exactly where #e44QV makes sense. It replaces the drop leg inner tube on the etrailer Manual Sidewind Trailer Jacks like #e35YV, #e86AV, and #e38AV and adds the SnapPad setup at the same time. That…

view full answer...

Answer 4

Hey Ben, the deciding factor is really where your current jack mounts and whether you want it to stay in that same location. If your enclosed trailer already has a standard A-frame jack opening and you’re happy with the jack staying in the center,…

view full answer...

Answer 5

Hey Allen, thanks for reaching out. For bolting on the etrailer Scissor Stabilizer Jacks #e36VV the recommended hardware is self-tapping 3/8" x 1" screws. If you use that, you won't need any bolts or washers or anything. You'll want…

view full answer...

Answer 6

Yes, the Ultra-Fab Ultra Scissor Jack #UF48-979006 will work as a replacement for your damaged stabilizer on your 2019 Keystone Hideout 274LHS. This jack has a universal style bolt mounting plate and an oversized footplate to prevent it from sinking…

view full answer...

Answer 7

Hey John, good question. The app must be running in order for the separate manual override button part #C83HR to work. If your phone is not connected to the controller with the app running, the button will not do anything. I know the connectivity…

view full answer...

Scissor Jack Stabilizer Jack Compatible with 8,000 lbs

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching