Does Curt Trailer Hitch Receiver 13084 for 1999 Jeep Cherokee Include All Needed Install Hardware

Question

Question:

I couldnt see a parts list that is included with Curt Trailer Hitch Receiver - Custom Fit - Class III - 2inch - 13084 . Im planning on purchasing this today/tomorrow but i need to know if i need the hardware kit and the little fishing wire tool. Thank you i advance.

asked by: Andrew H

1

Helpful Expert Reply:

The Curt hitch part # 13084 that you referenced includes all of the hardware you see in the picture I attached. There is a bolt leader/fish wire that comes with it as you can see. I also attached an install video for this hitch on a similar 1999 Jeep Cherokee as yours for you to check out as well.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The Curt Trailer Hitch part #13084 comes with 6 of grade 8, 1/2-13 x 1 3/4 carriage bolts. I recommend to clean the weld nuts with a brush like part #814092 before trying to screw in the carriage bolts. It helps to use a brush and WD-40. I have…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Roger, thanks for all of the information. The Redarc Tow-Pro Trail Brake Controller w/ Custom Harness item #RED44UR is going to be a great option for your 2024 F-150. It checks all the boxes for what you're requiring now and down the road.…

view full answer...

Answer 7

While we only have universal fit trailer wiring kits for your 1996 Jeep Cherokee we do have a solution that doesn't require splicing to install. For that you'd want the ZCI kit part #119250KIT which uses sensors on the taillight circuit wires…

view full answer...

Answer 8

Hi Steve; we do indeed have replacement hardware for the Curt hitch that fits your 2000 Jeep Cherokee; what you will need is the following: - Replacement Hardware Kit for Trailer Hitches #RHK All you need to do is click #RHK, enter the hitch part…

view full answer...

Answer 9

Your best option would be to use a tap to clean out the threads of the existing weld nuts on your 1998 Jeep Cherokee. Since the vehicle has a few years on it the weldnuts will be a little bit stubborn. I attached a couple links to the right that you…

view full answer...

Answer 10

If someone with your exact tent trailer replaced the 10 inch wheel and tires with a setup that had the tire size 5.30-12 instead then that would be enough info to know that it would work. You'd lose about an inch of fender well clearance. Based…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Does Curt Trailer Hitch Receiver 13084 for 1999 Jeep Cherokee Include All Needed Install Hardware

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching