Do Coil Springs Have to Be Removed on 2009 Volkswagen Jetta SportWagen for Firestone Installation

Question

Question:

Do I need to remove the coil spring to install these Coil-Tite Air helper springs?

asked by: Ken F

0

Expert Reply:

No, you will not have to remove the coil spring in order to install the Firestone Coil-Rite Air Helper Springs, # F4176. I have included a link to the installation details for you to view so that you can see what is involved for a typical installation.

expert reply by: Michael H

0

Answer 1

Hello Korey, I am sorry to hear that you got the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56403 installed in your 2020 VW Tiguan and are having issues with the left tail light. Were you able to hook the trailer up…

view full answer...

Answer 2

In my experience I have found the T-One Vehicle Wiring Harness #118811 to be the better 4-way wiring for your 2022 Volkswagen Tiguan. The internal components in the powered converter do not go out as often as those in the Curt T-Connector #C56403.

view full answer...

Answer 3

The SuperSprings Coil SumoSprings, #CSS-1125, will fit your 2015 VW Passat TDI. You are correct that the Firestone airbag kit, #F4176, will not fit the TDI models, but based on the coil spring dimensions you provided in the attached diagram, these…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Do Coil Springs Have to Be Removed on 2009 Volkswagen Jetta SportWagen for Firestone Installation

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching