To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hauling heavy gear or extra weight in the back can cause sag that throws off steering and braking. The Firestone Coil-Rite Air Helper Springs fit inside your existing rear coil springs to provide extra rear-end support. With a load-leveling capacity of at least 500 lbs (at most 1,000 lbs) and adjustable air pressure from 5 psi to 35 psi, you can fine-tune the support to match what you’re carrying. Keeping the vehicle level helps maintain stability, improves braking and handling, and keeps tire wear even.
Every load is different, and these Coil-Rite springs let you set your ride height and firmness to match. Add more air when carrying heavy cargo or towing, then drop down to the minimum when unloaded for a softer ride. Each side adjusts manually with individual inflation valves, so you can balance uneven loads and reduce body roll. The result is steadier handling whether you’re on the highway or on rough roads.

Bumps, dips, and uneven pavement are no challenge for these elastic polyurethane air springs. They absorb shocks and cushion the suspension to prevent bottoming out under load. That same durable construction keeps them flexible for years of service through varying road conditions. They’re designed to work with your factory suspension to smooth out the ride and keep the axle from taking all the impact.
This kit includes everything needed for installation—air springs, brackets, hardware, air line, and separate valves for manual inflation. The springs mount inside your existing coil springs using your vehicle’s spring seats with no need for complex modifications. Optional switches, gauges, compressors, and air tanks (sold separately) can be added later for quick in-cab adjustments if you want even more convenience.

Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews

Daniel B.
10/30/2014
Still working Great i just check the air pressure every now and then and i keep towing a three rail dirt bike trailer with three bikes on it very happy with air bags

Tim F.
3/9/2017
Continues to work well. Would recommend without reservation

Jimt
11/4/2016
A full year later and not a single problem. I havent had to add air since I set the bags up. About 11k miles of mostly city driving.

Shane K.
1/12/2015
Can i ask what you used as a bracket to mount in the spare tire well? Did you plug the holes you drilled with anything?

Brad S.
1/13/2015
- response for Shane K question - I did not use a bracket to mount the filler valves in spare tire well just used a drill bit slightly larger than valves and the tensioner nuts holds the filler valves in place no worries. Just be sure you mount the valves so that you can fill them when the spare is in place. I used silicon sealer around the edges so no air can get to the bare metal.

Mariano L.
3/17/2014
I will pick up a scamp 13 type 2 this May in Backus, MN using the same as your TV. I would appreciate if you can give me some type of feedback regarding your jetta performance, towing wise and MPG. I will be coming from Southern CA.I opted for an electric brakes on my and installed a curt hitch. I am in the process of installing a curt brake controller and wiring ,all purchase from e- trailer. You help me decide to install the Firestone Air Bags to my TV and I will Install it myself too. thanks to you.

Ed M.
1/31/2021
Still working just fine a year later.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
















1 D.
12/25/2020
It works well but again, the installation instructions are sketchy at best. I had installed valve up but the coils are very long and the valve hits the top of the coil upper bumper. It went sideways and I could not inflate. Later I went to my local service center and we reversed the coils and put the valve towards the bottom. My Hyundai Tucson has a lower bumper and there is a hole in the lower suspension arm so we made a hole through the bumper and ran the tube through the suspension arm. Works great. Ran the fill valves in holes through the rear plastic bumper: easy access. Please make Firestone aware of the install info and maybe add a video on your site for your customers. BUT: eTrailer, your service and customer support people are GREATTTT. Thanks