Recommended Suspension Enhancement for 2019 Ram 2500

Question

Question:

What suspension enhancement do you recommend for my 2019 Ram 2500?

asked by: Chris

0

Expert Reply:

For your 2019 Ram 2500 the suspension enhancement I recommend is the SumoSprings Solo Helper Springs part # SSR-312-54. This kit will give you the suspension support you are wanting without requiring you to ever inflate any air bags or run any air lines. And unlike some of the other similar suspension kits it won't give you a harsh ride quality when unloaded.

expert reply by: Jameson C

0

Answer 1

The most beneficial component that you can add/upgrade to help eliminate sway is an anti-sway bar, the Roadmaster Rear Anti-Sway Bar part #RM-1129-135 in particular. The Roadmaster Rear Anti-Sway Bar will replace your factory sway bar and because it…

view full answer...

Answer 2

With how the Firestone Air Helper Springs, like the #F2706, will attach to the frame, you would not be able to install a Timbren #TDR2500D as well. Both of these options will mount in the same place, unfortunately. That being said, the #TDR2500D may…

view full answer...

Answer 3

None of the suspension enhancement/helper springs we offer will increase the stated payload or suspension capacity of your vehicle, but they will provide additional support for the existing suspension. The Timbren #TDR2500D Aeon springs will offer up…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Answer 12

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Recommended Suspension Enhancement for 2019 Ram 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching