Recommended Tuner for 2018 Ford F-150 with 5.0L Engine

Question

Question:

What tuner would you recommend for my 2018 Ford F-150 with the 5.0L engine? Thanks.

asked by: Scotty

0

Expert Reply:

For your 2018 Ford F-150 I really like the Edge Gas Evolution CTS3 Performance Tuner # EP59YR.

This tuner will plug right into the OBD-II port on your truck so that you can re-program the ECM for increased power and fuel economy. A really nice part about this system is the included 5 inch high resolution, full-color touchscreen that will let you scroll and swipe through different menu options and parameters. The Mileage Coach is another great feature that lets you monitor your MPGs so that you can develop more fuel-efficient driving habits.

It is made right here in the USA and comes with a 1-year limited warranty.

expert reply by: Chris R

0

Answer 1

I have a solution for you, but there is not a plug-in adapter to convert your RV's taillights from combined wiring to separate wiring. If you are pulling a trailer with separate lighting, you will want to use a 2-wire to 3-wire converter. I…

view full answer...

Answer 2

I definitely recommend going with the bump stop jounce-style springs that you are referring to as these require no maintenance and are very easy to install. They drastically reduce rear sag and also help with the overall handling of your truck. Your…

view full answer...

Answer 3

Actually, there's a little more to it than that. The magnets on the #K23-478-479 are a little different, but the primary difference is the mounting bolt pattern. On a typical 3500 lb brake assembly, the mounting studs will all be 2-7/8 inches…

view full answer...

Answer 4

Most of the time brakes of the same size but with different capacities have different magnets. A larger magnet is needed for a higher capacity. If you were to go to larger capacity brakes they may seem too aggressive for the load. In that case you…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to factory reset an Edge Gas Evolution CTS3 Performance Tuner #EP59YR you will need to go through the following steps. 1. Enter the Quick Link menu. 2. Press the Settings icon. 3. Scroll through the list and select "Factory Reset".…

view full answer...

Answer 7

The older tuners could only fit one vehicle at at time. The programmers like the Edge Diesel Evolution CTS3 part #EP36YR has the ability to add vehicle licenses to tune multiple vehicles with 1 product. Each vehicle must be compatible with the unit.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The towing capacity of the 2003 Chevrolet Avalanche 1500 with 5.3L V8 and 4.10 rear axle is 8100-lbs. For a 7600-lb GVWR travel trailer the resulting 500-lb safety margin is adequate/low-ish. With a trailer that weighs substantially more than the tow…

view full answer...

Recommended Tuner for 2018 Ford F-150 with 5.0L Engine

Product Page this Question was Asked From

Continue Researching