Wiring Trailer Tail Lights for Flatbed Truck Installation
Published 11/06/2018 >
Products Featured in This Question
Question:
Using Optronics STL 14 RB on a flatbed truck- wiring questions I have the brake light wire and turn signal wires figured out, but where would I attach the running light/ taillight wires??
asked by: Kevin
Expert Reply:
When installing the LED Combination Trailer Tail Light - 6 Function - Submersible - 12 Diodes - Passenger Side # STL14RB the brown wire will be for your running light/tail light function. You will need to simply connect that wire directly to your running light circuit.
The green wire is for the combined brake and turn function, so if you don't already have them combined on your flatbed truck, you will need the Roadmaster Brite-Lite Wiring Converter # RM-732. This will allow you to combine the two for proper function with these lights. I've attached a video to assist.
To determine the wiring functions on your vehicle, I recommend using a circuit tester like # PTW2993 to probe through insulation to determine wire function prior to splicing.
Product Page this Question was Asked From
LED Combination Trailer Tail Light - 6 Function - Submersible - 12 Diodes - Passenger Side
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 8L x 2-7/8W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: oval rubber grommets
- Shop: BoatBuckle G2 Retractable, Ratcheting Transom Tie-Down Straps - 43" Long - 833 lbs - Qty 2
- Video: Review of TecNiq Trailer Lights - Tail Lights - TN22TR
- Shop: Towing Mirrors
- Shop: TecNiq Low Profile Stop Tail Turn Light with Reverse - 15.5" - Red LED - Clear Lens
- Shop: Optronics Streamline LED Combination Trailer Tail Light - Submersible - 11 Diodes - Clear Lens
- Q&A: Installing the 4-Wire Pigtail of the Optrionics Tail Light # STL68RB to 5 Wires from Vehicle
- Video: Review of TecNiq Trailer Lights - Clearance Lights Red White Combo - TN82TR
- Shop: Vehicle Tow Bar Wiring
- Shop: TecNiq T14 Over 80" ID Bar and Load Lamp - Red/White Combo - Surface Mount
- Shop: RV Interior Lighting
- Video: An In-Depth Look at the UltraThin LED ID Light Bar for Trailers over 80" Wide
- Video: What to Know About the Red Identification Light Bar with White LED Utility Light
- Video: All You Need to Know About the UltraThin LED ID Light Bar for Trailers over 80" Wide
- Video: Hands-On with the Thinline LED Trailer Tail Light
- Video: Curt 2 to 3 Wire Tail Light Converter: The Breakdown
- Shop: CE Smith Spare Tire Mount for Trailers - Steel - 4- and 5-Lug Wheels - 12-1/4" Long
- Shop: LED Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Clear Lens
- Shop: Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
- Search Results: gooseneck hitch
- Shop: Gooseneck Hitch
- Search Results: goose neck pin box
- Shop: Camper Tie-Downs
- Search Results: truck camper tie downs
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Search Results: trailer wiring
- Shop: Trailer Wiring





