Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Older bulbs tend to dim over time and draw more power than they should. This 2-1/2" round light uses three amber LEDs that shine through a clear lens for a clean, bright output with very little power draw—just 0.06 amps at 12.8V. The LEDs last up to 50 times longer than incandescent bulbs and put out a consistent light without the heat or fragile filaments, so you get reliable illumination that stays bright night after night.
Wet roads, rain, or even full submersion won’t hurt this light. The polycarbonate housing and acrylic lens are sonically sealed into one waterproof unit that keeps water and dirt out of the circuit board. The solid-state LED design and surface-mount technology handle shock and vibration better than old-style bulbs, so it’s ready for hard use in all kinds of weather.
No need to splice or guess at wiring. The light uses an industry-standard PL-2 connection that accepts a 2-prong plug (A46PB or A86PB, sold separately). Power and ground connect directly through the plug, which also seals the unused terminal against moisture and debris. It’s a simple, neat setup that makes wiring dependable and easy to maintain.

When space is limited or you want a flush finish, this recessed-mount design fits neatly into your trailer surface using a grommet (A55GB, A56GB, or A57GB—sold separately). At just 2-1/2" in diameter and 1" deep, it stays low profile while giving off strong light from the front. That clean fit keeps it protected from snags while looking tidy and professional.


Safety on the road depends on meeting lighting standards. This P2-rated light provides a 45-degree beam to either side for a total of 90 degrees of coverage, perfect for use as either a clearance light or a side marker when installed correctly. It meets DOT and FMVSS 108 requirements in any 360-degree position, so you know it’s fully compliant wherever you mount it.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at an LED amber clearance or side marker light from Optronics. This round trailer light can function as both a clearance light and side marker light when properly mounted. Features a sonically sealed waterproof housing and lens unit that is submersible. And it features durable surface mount technology when it comes to the construction of the LED circuit board. What that does, is it simply better withstand shock and vibration, and allows for improved heat distribution.Now this is a LED system. LEDs make great replacements for incandescent lights.
They last longer. They burn brighter and they're more efficient. With LEDs, you don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments. This unit contains a durable polycarbonate housing with an acrylic lens. It is compatible with 12 volt electrical systems.
Now on the back side, it accepts an industry standard 2-prong plug which is sold separately and available at etrailer.com. Also, when it comes to the installation It's a grommet mount installation.Your mounting grommet is sold separately as well. Also available at etrailer.com if needed. It is Department of Transportation compliant. It meets FMVSS 108 requirements and any 360 degree position.
Taking a look at the dimensions real quick, then we'll hook it up to power. Overall diameter is 2-1/2". The overall depth of the lens area is 3/4 of an inch deep. We're gonna go ahead and hook it up to power.I have my 2-prong plug here. So it just plugs into the connection points around the back of the unit.
Presses in. Creates a nice tight fit. So you can see here that it sends out a nice, consistent signal. We have three LEDs with three diodes. So the multi-diode design really helps optimize the overall light output. Clear lens allows plenty of light to come through. Nice amber color. Power drill at 12.8 volts at 0.06 amps. And Optronics puts a lifetime warranty on the LEDs.And that's gonna do it for today's look at the Optronics LED amber clearance or side marker light.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Mike L.
3/31/2026
That's great to hear, Jim! I'm glad to hear your marker lights are working well for you. Where's your favorite boating spot? I really like Table Rock Lake in Missouri near Branson...