Fascia Trimming Required for Front Mount Hitch on 2014 Chevy Suburban LTZ

Question

Question:

How much of the front bumper will require trimming for receiver 65052 to mount on a 2014 Suburban LTZ? I cant find any images of this receiver on a Suburban and it looks like the air dam and bumper will require trimming.

asked by: Rob J

0

Expert Reply:

I reached out to a representative of Draw-Tite who explained that the front mount trailer hitch # 65052 that fits your 2014 Chevy Suburban LTZ will require trimming "up to the bottom of the bumper fascia" and sent the accompanying photo showing the part that needs to be trimmed.

expert reply by: Kyle S

0

click to enlarge

Answer 1

I contacted our representative at CURT about the CURT Front Mount Trailer Hitch #31322. He informed me that the distance from the center of the hitch pin hole, to the front edge of the bumper measures approximately 7 inches. We do not have a Hidden…

view full answer...

Answer 2

Check out the picture I attached. In it you can see that the hitch opening will be right at the same distance out as the bottom of the license plate. I don't have an exact number I can give you but this would allow you to measure from the bumper…

view full answer...

Answer 3

Currently, 2 front mount hitches fit your 2008 GMC 1500 4x4. They are the Curt #31322 and Draw-Tite #65052. Both have a 500 pound vertical pull and 9,000 pound line pull. The specifications on the Draw-Tite hitch #65052 from the top of the mounting…

view full answer...

Answer 4

Hey Kenneth, thanks for reaching out! It sounds like you're needing the Camco RV Gray-Water Drain Adapter w/ Seal #CAM39322. If you're looking for something else please let me know!

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 9

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 10

The Curt Front Mount Trailer Hitch Receiver part #C31083 will work just fine on your 2018 Ford F-150 with Eco Boost Engine. I checked with both Curt as well as past customers as well to confirm this for you. I have also attached a photo of what the…

view full answer...

Answer 11

Hi Stan! The SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall #K2AVAL8219 and Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31018 will definitely work on your 2013 Ford F-250 4x4. We actually have both of these…

view full answer...

Answer 12

There are few differences between the Draw-Tite Front Mount Trailer Hitch Receiver #65067 and Curt Front Mount Trailer Hitch Receiver #C31083 that fit your 2020 Ford F-150, with the main difference being ground clearance. The Curt hitch does have…

view full answer...

Fascia Trimming Required for Front Mount Hitch on 2014 Chevy Suburban LTZ

Continue Researching