Lippert 5200lb Axle Hub Grease Seal Recommendation

Question

Question:

What wheel grease seals do I need to purchase for my 5200lb LCI axles? A picture of the axle ID tag can be found attached. I have not had the opportunity to take apart a hub and measure the spindle diameter - I was hoping that you folks may be able to help me determine what I need without having to do that. Thanks in advance.

asked by: Dennis R

1

Helpful Expert Reply:

Lippert 5,200 lb axles use the grease seal part # GS-2125DL. For a kit that would include new bearings as well you'd want # BK3-310.

expert reply by: Jameson C

1

click to enlarge

Answer 1

We have two bearing kits that will potentially work but you'll need to measure the spindle where your seal rides to know which kit you'd need as the only difference is the seal inner diameter. If the dimension you find where the seal rides is…

view full answer...

Answer 2

The D52 on your axle tag means it is a 5,200 lb axle. For a kit that has all of the bearings and seal for your Dexter D52 5,200 lb axle you'd want the kit part #BK3-310 and then for a spindle nut you'd want the #165686. Aside from that the…

view full answer...

Answer 3

Given the inner and outer bearing numbers you kindly provided (thanks for that!), you have a 5200 lb axle. We offer two different bearing kits that could work for you. Both include the replacement inner and outer bearings, the compatible races and…

view full answer...

Answer 4

I can certainly point you in the right direction. This will be a tricky one, as the Dexter 5,200 lb axles can use more than one seal size. We do not have the ability to pull an OEM build sheets to see what parts they installed at the factory so we…

view full answer...

Answer 5

There are two possible bearing kits for your trailer's 5,200 lb axles. There's the more common part #BK3-310 and the less common part #BK3-300. The difference is the seal size. The part #BK3-300 has a seal with an inner diameter of 2.25 inch…

view full answer...

Answer 6

Yes, you can clean the trailer brake magnets and other components on the Dexter Nev-R-Adjust Electric Trailer Brake Kit #K23-478-479 with brake cleaner. Be sure to dry the surfaces before reassembly.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Lippert 5200lb Axle Hub Grease Seal Recommendation

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching