Recommended Trailer Hitch for 2019 Hyundai Santa Fe
Published 09/28/2018
Question:
My 2019 Hyundai Santa Fe needs a trailer hitch what do u recommend
asked by: Conner L
Expert Reply:
The trailer hitch I recommend for your 2019 Hyundai Santa Fe is the Curt Trailer Hitch Receiver # C13195 because it is a complete bolt-on installation so you will not have to drill into your Hyundai's frame in order to mount it. I have added a photo a customer sent in of this hitch installed on their '19 Santa Fe so you can see how it will look on your car.
For wiring which will give your Hyundai a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 119250KIT. I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip.
You can use the link to the help article on ball mounts I've added to determine if this kit will give you the correct amount of drop or rise. I've also attached a link to our pages with each of our ball mounts and hitch balls for you to check out.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: 989900
- Search Results: trailer hitch ball mount
- Search Results: hitch adapters
- Search Results: trailer hitch
- Video: Installing the etrailer Trailer Hitch Receiver on a 2019 Hyundai Santa Fe
- Shop: Trailer Wiring
- Video: Best 2019 Hyundai Santa Fe Trailer Wiring Options
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2019 Hyundai Santa Fe
- Video: Curt Class III Trailer Hitch Complete Installation - 2023 Hyundai Santa Fe
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Shop: Brake Controller
on Trailer Hitch
Kyle S.
9/28/2018
The trailer hitch I recommend for your 2019 Hyundai Santa Fe is the Curt Trailer Hitch Receiver # C13195 because it is a complete bolt-on installation so you will not have to drill into your Hyundai's frame in order to mount it. I have added a photo a customer sent in of this hitch installed on their '19 Santa Fe so you can see how it will look on your car. For wiring which will give your Hyundai a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 119250KIT. I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop - a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip. You can use the link to the help article on ball mounts I've added to determine if this kit will give you the correct amount of drop or rise. I've also attached a link to our pages with each of our ball mounts and hitch balls for you to check out.