Best Storage Cover for 2018 Northwood Arctic Fox Truck Camper

Question

Question:

You recommend the camco cover #CAM45770 will this acomidate my ac unite and still fit ok.?

asked by: Corey G

0

Expert Reply:

The Camco UltraGuard Slide-In Camper Cover - 18' Long # CAM45770 is designed to fit truck bed campers that are between 16 and 18 feet in length. The overall length of the Arctic Fox 811 is 16 foot 8 inches on the 2018 model. The cover will be a great fit and will accommodate the Air Conditioner unit on the roof. The cover has a 3 layer top panel to resist the elements and still allow breathability so it won't trap water causing mildew or mold. It has integrated hold down straps to prevent the cover from flapping in the wind and holding the cover securely in place.

expert reply by: Jason S

0

Bob N.

3/27/2020

I have a arctic fox 811, what about the AC unit on the roof?

Chris R.

3/27/2020

Storage covers are designed with rooftop accessories like AC units and vents in mind, so you don't need to factor those in when choosing the right size. If you can let me know how long your Arctic Fox is (not including the tongue) I will be happy to make a specific recommendation.

Answer 1

The overall length of your 2019 Arctic Fox 990 is 17-1/2 feet which the best option for a cover is the part #CAM45770 that you mentioned. It fits this size perfectly and is a heavy duty cover made of polypropylene that will do a great job protecting…

view full answer...

Answer 2

The Camco UltraGuard Slide-In Camper Cover, #CAM45773, will fit a slide-in camper that measures up to 19 feet 6 inches long. In my research, I found the length of an Artic Fox 990 Slide-In Camper to be around 17 feet. The #CAM45773 may be too long…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Best Storage Cover for 2018 Northwood Arctic Fox Truck Camper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching