Are the Roadmaster Hy-Power Diodes Water Tight

Updated 07/23/2018 | Published 07/22/2018

Products Featured in This Question

Roadmaster Hy-Power Diode - (Qty 1)

(336)

$18.91

Roadmaster Hy-Power Diodes (Qty 2)

(336)

$31.55

Roadmaster Hy-Power Diodes (Qty 3)

(336)

$39.49

Roadmaster Hy-Power Diodes (Qty 4)

(336)

$57.54

Question:

1. Can I use this configuration 2. Can I mount the Roadmaster under the vehicle/is it water tight?

asked by: Lazarus P

Expert Reply:

As long as you are not exceeding the 85 amps at 12 volts per diode max load then you can definitely use the configuration in your diagram.

I spoke with my contact at Roadmaster who said that the connections are not watertight but the internal components are. You would either need to find a way to make the connections watertight (as you mentioned in your diagram) or simply wipe the connections off if you were to go off-road with your 2011 Jeep Wrangler and get the diode(s) wet.

We have the diodes in a quantity of 1 # RM-790, 2 # RM-792, 3 # RM-793, or 4 # RM-794 depending on how many places you want to install it or if you would like to have spares.

expert reply by: Jon G