Result: 6 pin socket

Hello Dan, thanks for reaching out. We can definitely provide the full flat tow system for your 2026 Ford Maverick XLT Hybrid. Here is what I recommend: - Demco Tabless Base Plate Kit - Removable Arms #DM38CV - etrailer XHD Non-Binding Tow Bar - RV…

To make the physical connection between the Roadmaster #RM-676 Nighthawk tow bar and the tab the D-ring is connected to, you'd need the #RM-035 for 7/8 or 1 inch wide tabs or #RM-035-1 for 3/4 inch wide tabs. I'd also recommend you check with…

Hey John, you'd want the part #BLU56HR for a diode wiring kit that fits the 2024 GMC Sierra 2500 with the animated taillights. I also attached a link on this page to a PDF that details how they install on the new style of taillights the truck has…

Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16 is exactly what you are looking for as it has very tall side brackets which will be more than enough to get the receiver tube down under the rear bumper, adjustable…

I have a solution for you. Roadmaster EZ Base Plate Kit - Removable Arms #52728-1. Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs #RM-522. These two units are not compatible with each other and you…

The best way to attach safety cables like #RM-643 would be to use safety cable extensions like #RM-910648-20 and loop them around the frame members just behind the bumper. This is confirmed by Roadmaster.

The Stay-IN-Play DUO, #DM86VR, ties into the brake light switch on your towed car so that you'll be notified only when your towed car's brake pedal is being engaged. There is an inertia-sensing mercury switch inside the DUO's controller…

I was able to verify with Demco the red wire on the Coachlink #SM99945 for the Demco Stay-IN-Play #DM86VR is positive and the black is negative.

Hey Les! There's a note in red in the vacuum connection section of installation instructions on the Demco Stay-IN-Play DUO item #DM86VR that addresses your concerns. It states the following: "If you have an electric brake assist and your…

Towed vehicle wiring, like the Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR, only sends power to the tail lights and wouldn't be sending anything to the trailer connector. You would need to wire a second connector to the back of…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

There isn't a plug-in adapter that would allow for a simple installation of a brake controller like the Curt Triflex Brake Controller part #C24VV in your 2012 Tiffin Allegro, but from the research I did there should be a bundle of wires under…