Trailer Hitch Recommendation for Mini Clubman 2012  

The chain links on safety chain #1483-535-04 are 3/8 of an inch in diameter. This chain has a 5,400 lbs. Working Load Limit. For a quick link use #6590-044-04. Its working load limit is 2,200 pounds. Since the safety chain is rated higher using a 3/8…

I have added a photo for you from the instructions showing the location where the base plate arms protrude on your 2012 Mini Cooper Clubman after installing the Blue Ox Base Plate Kit #BX1307. As you can see, you will have to trim the chrome piece on…

According to Blue Ox the Blue Ox Patriot #BLU37TR draws .50 amp (half an amp) when just plugged in. When activating the brakes it draws 1.50 amps so it will not drain the battery as long as you unplug if the vehicle will be sitting for a longer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Hi Bryant, It's definitely a smart idea to check and make sure, and I can verify for you that yes, the Curt Trailer Hitch Receiver #C82ZV 100% will fit your 2024 Ford Ranger. I went ahead and confirmed this fit with Curt for you as well.

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…