Installation of Equal-I-zer Spacer Rivit and Washers Kit
Updated 07/10/2018 | Published 07/09/2018
Products Featured in This Question
Question:
Where can I find instructions on how to replace the spacer rivet and washers. My old hitch bolts came lose and the rivet and washers fell out and Im not sure how to get them back in and adjust the tilt and tighten the bolts so I can use my hitch again. If you can send me a link or a PDF that would be most helpful! Thank you
asked by: Kim
Expert Reply:
The Replacement Spacer Rivet and Washers for Equal-i-zer Weight Distribution Head # EQ95-01-9450 will work with all Equal-I-zer systems. I've attached the installation details of the Equal-i-zer Weight Distribution System # EQ37100ET where you will see the instructions on the rivet and spacer installation on page 10 and 11. The stacked washers on the rivet are held in place by the system when you install the hitch head to the shank with the large bolts correctly.
Product Page this Question was Asked From
Replacement Spacer Rivet and Washers for Equal-i-zer Weight Distribution Head
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Rivets
- Equal-i-zer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Equal-i-zer High-Performance Lubricant - 4 oz
- Q&A: Can A Curt Shank Be Used With A Fastway e2 Weight Distribution System?
- Shop: Replacement Spacer Rivet for Equal-i-zer Weight Distribution Head
- Shop: Replacement Spacer Rivet and Washers for Equal-i-zer Weight Distribution Head
- Q&A: Replacement Spacer Rivets And Washer Kit For A Fastway e2 Weight Distribution Hitch
- Q&A: Replacement Spacer Rivet to Fit Fastway e2 Weight Distribution System
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Replacement Angle Set Bolt for Fastway e2 Weight Distribution Head - 6,000 lbs to 12,000
- Shop: Thule Pack 'n Pedal Basket for Bike Racks - 33 lbs - Black
- Video: Equal-i-zer Weight Distribution EQ95-01-9450 Review
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Shop: Brake Controller
- Article: 5 Things to Know About Weight Distribution Hitches
on Accessories and Parts
