Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Andy, the Ventline Roof Vent part #V3092-603-00 does not include a garnish. You can pair this with either the Polar White #VA0445-33 or Birch White #VA0445-25 ceiling garnish which is designed to fit roofs 7/8" to 2" thick. How thick is…
view full answer...Yes, Tekonsha released the part #3062-P which is a brake controller install harness that fits your 2019 Subaru Ascent and would work well. I attached a picture that shows where you'll find it on your vehicle too. For a brake controller I would…
view full answer...Roadmaster makes a base plate kit that is designed specifically for the Rugged Ridge bumper like you have which is part #1437-3 which you could attach a Roadmaster tow bar like the Falcon 2 #RM-520 directly to.
view full answer...Most shops would probably charge you one hour of shop time to install the Torklift SuperHitch Magnum part #TLD1111-30 on your 2022 Ram 3500. The correct Torklift Camper Tie Downs would be the part numbers #TLD2140 and #TLR3510. This will probably…
view full answer...Hey Phil, If you're looking for the factory wire harness for a plug and play connection you'll find a connector that's gray with a red/orange center like the plug on the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51436.…
view full answer...I spoke with my contact at Roadmaster and I have the following measurements for the Roadmaster MS Base Plate Kit - Fixed Arms Item #1437-3. The rectangular plate is 6-11/16 inches long by 4 inches tall overall. The mounting holes are spaced 5-3/16…
view full answer...The distance between the two tabs on the Roadmaster Direct-Connect Base Plate Kit #1437-3 is approximately 2-1/4".
view full answer...Yes, you can use the Camco water heater element part #CAM02143 that you referenced in your Suburban hot water heater. We've checked with Camco and they've told us this would work as well as had customers come back and let us know that it…
view full answer...We have a few different options for you to choose from. The CE Smith U-Bolt, #CE15252A, is zinc-plated and it is 3 inches long x 3-1/8 inches wide x 7/16 inch diameter. This u-bolt was designed to fit around 3 inch trailer frames. We also offer this…
view full answer...Andy, the Shock Absorber for Roadmaster Comfort Ride Trailer Suspension System #RM-204000-00 measures 11-1/2" long eye to eye compressed, 17-1/2" long eye to eye extended, and the eyelet holes are 12mm diameter.
view full answer...If the inner diameter is 1.719 inches and the outer diameter is 2.565 the #RG06-050 would be the closest matching grease seal we offer. You will need a digital or dial caliper for this measurement. The grease seal number you referenced doesn't…
view full answer...The smallest wheel size we offer with a 8 on 6-1/2 inch bolt pattern is 16 inch. If that's the bolt pattern your trailer has you are going to need a wheel and tire for it. So the part #LHACK133 would be a great option. This is a 16 inch wheel…
view full answer...