65 inch Square Crossbar Recommendation to Replace Old Thule Load Bars

Question

Question:

Hi The Inno croos bar are iqual to thule? I need a pair ..65 inches long..

asked by: Miguel V

0

Expert Reply:

Inno and Thule crossbars are very similar in size but they are not interchangeable per Thule as they haven't been tested together. So they will fit but you would void any warranty if interchanging manufacturer parts. Thule no longer makes their square load bar and instead now has a slotted SquareBar that doesn't work in the older towers.

For a pair of 65 inch Inno bars you'd need part # INB165.

expert reply by: Jameson C

0

Answer 1

The old Thule Crossroad 450 Feet were compatible with the Thule square crossbars that were a whole all the way around. The new Thule SquareBars have a slit in the bottom so they only fit the standard Thule feet and aren't compatible with the…

view full answer...

Answer 2

Yes the Inno Square Crossbars part #INB137 are the same 7/8" tall and 1 1/4" wide as what the original Thule Square bars were. They will work with the older Thule Foot Packs for square bars like part #TH450. As you know they are a pass…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Greg! Yes, the Rhino-Rack Quick Mount Legs for Sportz Crossbars #RRRLT600H will fit the T-slot rails on your RetraxPRO XR. For a set of four under one part number we have the #RRRLT600. Regarding the clearance, the handle won't clear as is so…

view full answer...

Answer 7

The older style of Thule square bars are no longer made but I do have a solution for you. The Inno square crossbars are the exact same dimensions and will fit your Thule feet so you'd want the #INB137 for a set that is 54 inches long. The new…

view full answer...

Answer 8

Hey Steve, the longer crossbars part #MPG4001 can be used on the Ecolight trailer part #MAL53FR if you wanted as they are the same dimensions aside from length. This would give you the 78 inch long crossbars.

view full answer...

Answer 9

The Wide Body Mounting Brackets #Y08001 and Side Loader Mounting Brackets, #Y08002, for Yakima 1A Raingutter Towers both include two mounting brackets as well as the hardware to install them. For a total of four brackets you would just need to order…

view full answer...

Answer 10

Hey Chris, To connect your Rhino Rack crossbars to the t-slots of a Pace Edwards UltraGroove Retractable Hard Tonneau Cover #311-KED7936 you'd need the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars #RRRLT600H.

view full answer...

Answer 11

Hello again Joseph, I have attached several images of what vehicles the Thule SquareBar Evo Crossbars - Steel - 53" Long - Qty 2 #TH712400 are a good fit for. Do you have the other parts to attach the roof rack to a vehicle or just the bars? The…

view full answer...

65 inch Square Crossbar Recommendation to Replace Old Thule Load Bars

Product Page this Question was Asked From

Continue Researching