Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Specs:
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
I own a 2005 Nissan Pathfinder with crazy high roof rails, and this Inno system works perfectly - Now I can securely mount my Thule Hullavator kayak rack which is made to attach to square bars. I had been using a Yakima round bar setup for a few years because I had tried the Thule Crossroads Foot Pack, but just couldn't make it fit.
IMO Inno quality is equal to or better than Thule anyway. Plus Inno is cheaper.
Also customer support at etrailer.com is very good and trustworthy.
Work exactly as described and after a year, still in great condition.
Awesome rack for the money!! I’m sure there are better racks, but wind noise is low and it’s solid.
Rack detached from my roof on the highway at about 70mph, taking my cargo container with it. Luckily, no one was behind me as it would have very easily caused an accident. Customer service was terrible and didn’t accept a return. Damaged the contents of the cargo container.Do not buy this product or from this company as they will not help.
Thank you so much for providing the below information! My experience with etrailer.com has been great so far and I appreciate the follow up.
The crossbars fit perfectly and I will definitely be writing a review. However, I realized when I opened the bike racks that I purchased the wrong rack for my car/bars.
Would you be able to provide me with information on how to return the bike racks
Heather A.
1/26/2019
The inno fork mount bike rack part INXA391 that was purchased is for aero bars. The one you need is for square bars inno part # INA391. I have attached the link below.
Helpful Links
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
Brian K.
4/18/2024
No problems whatsoever. Great product.
Perfect fit for my '22 Kia Sportage. Works great, took a kayak trip out on the lake 10 minutes after installing. Initial setup was simple and easy. Once all the components are configured and you're familiar with setup, all future removals and re-installs will be a breeze, won't take more than 5-10 minutes to install or remove.
Rack works great with my 2014 escape carrying a heavy 14 ft old Town and a 10ft kayak. Service is great, was missing 2 endcaps called them up and they sent them out next day.
This model is not the most stylish and sleek roof rack but its sturdy and made with quality materials. Easy to set up and its even easier to put on the vehicle and take off the vehicle. I only put the rack on my Ford Focus when I go kayaking. Great bang for buck!
Jay
2/11/2025
Its been a year and Im still loving my roof rack. Everything is holding up sturdy and strong!
Kate F.
2/11/2025
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
Great product so far! Just installed the roof rack on my 2015 Ford Fusion and everything was straight forward. I’m excited to use it while kayaking and traveling!
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
Easy to install. I’m happy with the product. Shipping took agile but worth it! I added kayak racks and now I’m able to enjoy my life a little more.
bars and adapters to my MKX worked perfect traveled from South Carolina to Maune with a kayak on the roof. Totally trouble free
James
7/12/2025
after a year all is well, in fact I added the Thule hulavators and they work great. Im a happy customer
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
I did the research for a while looking at many different brands for a good quality crossbar at the right price. I came across this one a Japanese brand. As I read more about the brand it has been popular in Japan. I know Japanese product are top quality.
The crossbar, the footing and keys are made with high quality material. Instruction was very clear. Installation took about 10-15 minutes. I love that no tool required to do the install. No wind noise that I can hear at low speed. Have not tested at high speed yet. Overall, highly recommended to anyone looking for a crossbar from a great less polular brand but half the price of other more popular brand.
Just finished installing on my 2021 Toyota Tacoma. Do not waste your time with the cheap paper tape measure that’s my only negative complaint.. other than that the price was right and it looks great! I had to wait a couple months for back order parts but we’ll worth the wait! I have not driven with it yet so I’m assuming there will be wind noise but I’m used to that with having a Jeep renegade as my last vehicle with the cross bars. I’m excited to haul my kayaks!
I am writing this review in the context of an owner of a Yakima roof rack system with round crossbars from a vehicle many vehicles prior to the 2021 Hyundai Tucson on which I just installed an INNO roof rack system with the INSUT Feet, INNO NB137 crossbars and 2 INNO INA391 roof bike racks. The INNO crossbars are rectangular in profile, rather than round, but with a grooved top that mates with the INSUT feet, the crossbars should stay firmly put where they are set in the feet. They do not weigh much, but feel pretty solid given their light weight and relatively thin metal walls. One change I would suggest to INNO is to put a factory mark on the center of the crossbars rather than supply a flimsy little decal for the user to measure and place on the crossbars. I never bothered to try to exactly center the round crossbars on my Yakima system, but it is important, at least on the naked roof of the 2021 Tucson, to properly space the feet from the center of the crossbars. I will probably eventually just put a dab of white touch-up paint to mark the center point.
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
First and foremost… YES! I would recommend this product to anyone, so def. read further. Price wise… well below what the more known name brands wanted for a similar setup. Product is well made , but if I had to point out one defect… the rubber shoe the rests between the factory roof bar and the inno feet detaches easily during install (see photo). I will figure out how to securely attatch it when I remove it, because (IMO) it's not one of those units that remains on perminantly.
H. B.
8/21/2018
Still satisfied… good buy… definitely recommend.
This product exceeded my expectations!! Fit my 2014 Explorer with no issues. Extremely easy to install- took about 15 minutes, these crossbars are sturdy and fit perfectly in the INNO feet that secure to the roof rails- I will be hauling 2 paddle boards and have no doubts that they will travel well. I recommend this product !!
Linda S.
7/21/2022
Love this product -they still look brand new after a year - stored them over the winter and they are so easy to put on and take off. I am ready for paddle boarding.
The kit etrailer put together contained all the parts I needed. It took a little figuring to determine how to put it together, but in total only about 30 minutes from box opening to mounting. Now that it is all sized and spaced, it should be much quicker to remount in the future.
I installed it on a 2016 Ford Focus hatchback. I am planning to carry a Thule Cascade 1700 XT rooftop carrier.
So far it looks good. The price was excellent. While driving, it has a bit of an humming noise, but it is not loud or annoying. I like that it has a full set of keys.
All told, it seems like a good product at a reasonable price point.
David M.
5/11/2020
After 1 year, I am quite happy with my roof rack. I have used it for many cross-country trips, camping trips, and one move. It continues to perform well. I am glad I bought it. I have made marks with a dark red marker on the door frames to mark where to align the clamps. You cant see them without a bright light at the right angle, but they make alignment fast and easy. Now I can rig the bars and carrier in about 20 minutes, and be certain everything is in the right spot.
Perfect replacement for my rusted Thule crossbars.
Fits great, had to order a fit kit from Japan for the vehicle, as it is JDM only, and INNO was my only option, I am glad etrailer.com had the rest of the parts I needed to get it installed and for a great price!
Kate F.
5/14/2026
Glad we had the other parts you needed as well Eli! Looks great! What do you mainly plan on using the roof rack for?
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/4/2022
There are a lot of factors involved when installing and using a roof rack. For the 2018 Ford Focus Sedan the roof rack capacity is 120 pounds although you would want to also check that the manual says for the vehicle. Before tightening anything down you will want to look at the instructions to find the proper spread between the bars and also the feet. Once that is down you will take the included Allen tool and tighten down the bolt. Next you will install the fit kit which will have you start with the foot pad. The foot pad will line up with the holes at the bottom of the foot. These will push into place and are numbered so that the right pad lines up with the right foot. To install the clamp you will remove the screw from the outside and loosely tighten it up to hold the clamp into place. The next step is to measure from the center of the doorjamb you will get the measurement to the center of the bar. You will find this in your instructions. Repeat on the other side. Then you will take the tightening tool and snug it up against the door. You will do this on the passenger side as well. Then you will go back and forth from drivers to passenger side giving about five or six turns each time until its completely tightened down. When it makes the clicking sound you will know its completely tied down. You do not want to over tighten it.