Wide Body # Y08001 and Side Loader # Y08002 Mounting Brackets for Yakima 1A Raingutter Towers

Question

Question:

Is the price for a set of 4? How many in a package?

asked by: Dan

0

Expert Reply:

The Wide Body Mounting Brackets # Y08001 and Side Loader Mounting Brackets, # Y08002, for Yakima 1A Raingutter Towers both include two mounting brackets as well as the hardware to install them.

For a total of four brackets you would just need to order a quantity of two.

expert reply by: Leah S

0

Answer 1

The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets #Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers #Y00101, which come in a…

view full answer...

Answer 2

I sent this to my contact at Thule and she said that's not how that's supposed to install. What you have are gutter feet like #TH300R which require a rain gutter on the side of the roof. What you'd need to install this setup without a…

view full answer...

Answer 3

The MORryde Jerry Can Mount for Jeep Wrangler TJ and YJ #MR69MR has a 2" shank so it will fit perfectly with either the Wilco Offroad Hitchswing or the Saris Swing Away Hitch Extender #SAR36VR. I recommend the Saris over the Wilco simply because…

view full answer...

Answer 4

From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers #Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) #Y00101 fit these Kwik-Rail mounts. For…

view full answer...

Answer 5

Hey Sonya, does the 2014 Dodge Grand Caravan have a roof rack installed on it? One would be required for the Weekender to fit and oddly enough we don't have any roof rack options that fit the Grand Caravan.

view full answer...

Answer 6

Hey Mike, the smallest diameter wheel and tire we offer that fits a 5 on 4-1/2 inch bolt pattern would be the size 165/65-8 like the part #AM3H240 which is just a little over 16 inches in diameter. Now since this is a smaller wheel not all 5 lug hubs…

view full answer...

Answer 7

We have a couple options that will work for your Wells Cargo trailer. The first rack I recommend is the Rack'em Fitz-All Enclosed Trailer Ladder Rack, part #RA-28. This rack has a telescoping design and will fit trailers from 4 ft to 8-1/2 ft…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 11

Hey Trace, would a 55 inch crossbar length work? If so, the Yakima HD bar part #Y22BB would be what you will want. A longer bar isn't guaranteed to fit since the mounting channel on the bottom of the bar does not extend the entire length of the…

view full answer...

Answer 12

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Wide Body # Y08001 and Side Loader # Y08002 Mounting Brackets for Yakima 1A Raingutter Towers

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching