Recommended Trailer Hitch Receiver and Wiring for 2015 Jeep Wrangler

Question

Question:

2015 Jeep Wrangler unlimited Rubicon hard rock I want to install curt #13432 hitch and a wiring bracket that has both 7 pin and 4 pin capability. Im curious what I will need as far as wiring, and anything else you might be able to tell me about the install. Thank you!

asked by: Mike P

1

Helpful Expert Reply:

The Curt Trailer Hitch Receiver # 13432 is a fit for a standard rear bumper on your 2015 Jeep Wrangler Unlimited Rubicon Hard Rock edition.

For your wiring, I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55124 and then adding the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7. To get the full function of your 7-way, you will also need to add a brake controller like # 90195.

I've attached some videos and an article to assist. For your mounting bracket, I recommend the Curt Easy Mount Bracket # C58000.

expert reply by: Jason S

1

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

Yes, the Curt Hitch part #13432 that you referenced has been confirmed to fit the 2015 Jeep Wrangler and Wrangler Unlimited. For trailer wiring you would want part #C55124. If you plan on doing some towing you might be interested in etrailer ball…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Recommended Trailer Hitch Receiver and Wiring for 2015 Jeep Wrangler

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching