How Tall are the SumoSprings Solo Custom Helper Springs SSR-211-54

Question

Question:

hi how tall are these springs?

asked by: JOHN R

0

Expert Reply:

I spoke with my contact at SuperSprings regarding SumoSpring kit # SSR-211-54. The springs themselves are 5 inches tall. The whole assembly when put together and installed is 6-1/4 inches tall.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

When the SumoSprings Solo Custom Helper Springs item #SS65FR are installed on your 2020 GMC Sierra 1500 you will have a 1/2" - 1" of clearance with no additional cargo weight. This allows for you to have a comfortable ride when you are…

view full answer...

Answer 8

Hello Graham, thanks for reaching out. So far I have been pretty impressed with the PacBrake air bags. I would say they are in line with the quality of the Air Lift air bags. They use similar top plates. Pretty much everything about the design of…

view full answer...

Answer 9

Thanks for your question and congrats on your new camper, Glenn! I see you were looking at the Timbren Suspension Enhancement System #T53MR. If you’re just doing casual towing, I wouldn’t recommend going with Timbrens. They’re really best for…

view full answer...

Answer 10

Hi Jeff! The mirrors I recommend for your 2022 Chevy Silverado 1500 ZR2 are actually the ones you were looking at, the Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side #LO54FR. Longview makes some of the best towing mirrors on the…

view full answer...

Answer 11

Hey Allen, thanks for the information. The best SumoSprings for your 2019 Chevy Silverado 1500 are going to be the 1,500 lbs capacity item #SS45FR. These fit both the 2WD and 4WD models and replace your factory bump stop. The SumoSprings item #SS45FR…

view full answer...

Answer 12

Hey Mark, the SumoSprings kit part #SS45FR would be a great option for your 2025 Chevy Silverado 1500 and wouldn't be too harsh. While this does provide 1,500 lbs of additional support the SumoSprings kits are not known to be harsh like Timbrens…

view full answer...

How Tall are the SumoSprings Solo Custom Helper Springs SSR-211-54

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching