What is the Bolt Hole Spacing of the Draw-Tite Front Mount Trailer Hitch Receiver Part # 65053

Question

Question:

What is the weight of this hitch?

asked by: Leo

0

Expert Reply:

I went out to the warehouse and measured the Draw-Tite Front Mount Trailer Hitch Receiver part # 65053 for you. The bolt holes are 38" apart left to right on center and 5" apart front to back on center. I have also attached a photo with these measurements for you as well.

expert reply by: Conner L

0

click to enlarge

Leo

5/18/2018

What is the weight of this hitch?

Conner L.

5/18/2018

The Draw-Tite Front Mount Trailer Hitch Receiver part # 65053 weighs approximately 31 lbs.

Answer 1

We have the Draw Tite front hitch part #65053 that fits your 2022 Ford E-450 Jayco motorhome.

view full answer...

Answer 2

We do have a front-mount trailer hitch receiver for your 2019 Coachmen Leprechaun, although according to my research, the Leprechauns that have a Ford chassis were built on a Ford E-450 chassis, as opposed to an F-450 chassis. So the front-mount…

view full answer...

Answer 3

Hey Sue, we have a front hitch that fits your 2022 Jayco Redhawk 24B with the Draw Tite part #65053 which would be exactly what you are looking for but the hitch you referenced only fits at the rear of vehicles. The #65053 definitely has the capacity…

view full answer...

Answer 4

In regards to carrying a spare wheel/tire on a Entegra Odyssey you have a few options, a bumper mounted spare tire carrier like the Brophy Rigid Mount Spare Tire Carrier part #BR56VR or a hitch mounted spare tire carrier Roadmaster Hitch Mounted…

view full answer...

Answer 5

We have a number of spare tire carriers available from Roadmaster, Demco, and other manufacturers; However, Blue Ox does not build an option. If you are needing a spare tire carrier for your 2017 Jayco Redhawk Motorhome, may I suggest the Roadmaster…

view full answer...

Answer 6

Yes, the front hitch part #65053 does fit a 2019 Ford E-450 cutaway RV like what you have. The chassis has been the exact same and won't be changing until 2021 models so it will fit your 2019.

view full answer...

Answer 7

Definitely not as that's for mid-2000s Silverado/Sierra trucks; the trailer hitch with the highest capacity for your 1985 Chevy G30 van is the Curt Trailer Hitch Receiver #C13016. This has at 6,000 lb towing/600 lb tongue weight capacity that can…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Ben, since we know your 2025 Gulfstream 6327le is built on a Class C Ford E-350 chassis you would want the Roadmaster front sway bar part #RM-1139-176 as a confirmed fit. This will do a great job improving the handling and stability of the RV. Do…

view full answer...

Answer 10

Hey Tom! The factory end links on your 2021 Ford E-450 are perfectly fine to reuse with the Hellwig #HE26GR. The kit includes upgraded polyurethane bushings and new hardware, so the only thing you aren't replacing is the end links themselves. On…

view full answer...

Answer 11

Hi Ed; unfortunately, that is a pretty common problem with new motorhomes. The front and rear anti-sway bar are typically the best way to start so adding the Hellwig Front Anti-Sway Bar #HE26GR is a great idea. After that, I recommend a steering…

view full answer...

Answer 12

Hello William, I think you already found it! We don't have schematics for every camper showing exactly which components were installed from the factory. I was able to find an excellent YouTube video where they gave a tour of the Coachmen Pixel…

view full answer...

What is the Bolt Hole Spacing of the Draw-Tite Front Mount Trailer Hitch Receiver Part # 65053

Continue Researching