Can Pro Series Sliding Fifth Wheel Hitch part # PS30129 be Used w Mor/Ryde Orbital Rotating Pin Box

Question

Question:

Can I use this Pro Series 5th Wheel Hitch w/ Square Tube Slider, Rails and Install Kit - Slide Bar Jaw - 15,000 lbs Item # PS30129 with a orbital-rotating-pin-box number RTPB 83-1622-03 that is on my travel trailer or is there a better option thank you

asked by: Bruce

0

Expert Reply:

Yes, you can use the Pro Series Sliding Fifth Wheel Hitch part # PS30129 with the Mor/Ryde Orbital Rotating Pin Box that you mentioned. Since this pin box is designed for turning clearance with short bed truck you'd just need to leave the slider mechanism slid all the way forward at all times.

expert reply by: Jameson C

0

Answer 1

Hello Dan, Welcome to etrailer. I am really glad you found us! First off, congrats on the North Point!! You are absolutely right to question the salesperson’s recommendation. Unfortunately, some dealers focus more on moving units than on making sure…

view full answer...

Answer 2

Hey Vernon, The best way to reduce tongue weight if you have to much is using a weight distribution system like #C95MJ. This system is going to evenly distribute the weight between the trailer and the towing vehicle taking stress off of the rear axle…

view full answer...

Answer 3

Hey Kyle. Unless you're driving around with 1,500 lbs of gear in the bed of your 2025 Ford F-250, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item #AL29DQ are not going to be overloaded. Your 5th wheel hitch and a full tank of fuel…

view full answer...

Answer 4

Though the Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 and the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 that are designed to fit your 2022 GMC Sierra 3500 are both American made and rated up to 7,500 pounds of…

view full answer...

Answer 5

Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…

view full answer...

Answer 6

Hey Kenneth, from the front of the front puck to the very front of the B and W Companion Slider Hitch part #BWRVK3370 the distance is 7-1/2 inches. Would that be enough?

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

The best option for carrying E-Bikes on a travel trailer is the Swagman E-Spec Electric Bike Rack #S94FR. The E-Spec holds your bike down with hooks that touch the frame and it can hold up to 70 lb E-bikes and it will do well to carry your two…

view full answer...

Answer 9

Yes, the Curt rails that come with the Fifth Wheel Rail kit part #C16420-204 are confirmed as a fit to work with Reese fifth wheel hitches like your Reese 18k slider. As long as your hitch isn't and Elite or Signature Series hitch like part…

view full answer...

Answer 10

Realistically, you can position the pivot arms of the B&W Companion #BWRVK3300 3" in front of the axle (closest to the cab) or 1" in front of the axle (farthest from the cab) when installing it in the factory puck system of your 2015…

view full answer...

Answer 11

Good question Mel, and I don't blame you for being confused since there are a lot of options and there is probably more than one right answer. The correct pivot arm position will depend on the clearance between the nose of the camper and the cab…

view full answer...

Answer 12

When installing the pivot arms on your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000lbs Item #BWRVK3600 you'll want to ensure that you have 6" of clearance between the bed rails and the nose of your…

view full answer...

Can Pro Series Sliding Fifth Wheel Hitch part # PS30129 be Used w Mor/Ryde Orbital Rotating Pin Box

Continue Researching