The Flash E Series HD Adjustable 2-Ball Mount # FA42-00-2625 that you Referenced Weighs 22 lbs

Question

Question:

How much does the hitch weigh?

asked by: William H

0

Expert Reply:

The Flash E Series HD Adjustable 2-Ball Mount # FA42-00-2625 that you referenced weighs 22 lbs.

expert reply by: Jameson C

0

Answer 1

The Flash E Series HD Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 6" Rise - 18K #FA42-00-2625 has the hitch balls that install with a hex screw on the backside of the ball mount. When installed on the shank, the shank will ensure…

view full answer...

Answer 2

We do offer many fixed and adjustable 2-1/2-inch ball mounts, shown on the linked page, including items like Fastway adjustable model #FA42-00-2625. Although we do offer friction sway control adapters #RP26005 for 1-1/4-inch Class II hitches and…

view full answer...

Answer 3

The Fastway Flash E Series Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 6" Drop, 7" Rise - 10K, #FA42-00-2600 you said you have is a fit for 2 inch hitch receivers not 2-1/2 inch hitch receivers. The Fastway Trailer Hitch Lock and…

view full answer...

Answer 4

I have a possible solution for you, but Curt does not offer a silver two ball attachment for the Curt Adjustable Ball Mount #C45902. One possible solution for you is the Fastway E Series HD Adjustable 18K Ball Mount #FA42-00-2625. A nice feature…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

The Flash E Series HD Adjustable 2-Ball Mount # FA42-00-2625 that you Referenced Weighs 22 lbs

Product Page this Question was Asked From

Continue Researching