Customers compare FA42-00-2625 to these similar products
Products Featured in this Video
Today we're going to take a look at the Flash E Series Heavy Duty Adjustable Two Ball Mount for 2 1/2" Hitch Receiver with an 18,000 pound weight capacity. Now this is a nice machined air-craft grade billet aluminum construction which is corrosion resistant. It is a solid aluminum which produces a nice light-weight yet strong ball mount and there's no welds on it which could cause weak points that… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
You are exactly right. To use the Bulletproof ball mount #BPH64FR in the rise position you simply flip it over. The picture below will show you an example of the ball mount in the rise position.
view full answer...The BulletProof Hitches 2-Ball Mount #MD256 is going to allow for play inside the receiver as this ensures the hitch does not get seized in receiver tube due to moisture and corrosion. I recommend checking out the Solid-Tow Adjustable 2-Ball Mount…
view full answer...The Provide Tire part #TR225LRE is a Load Range E tire that has a capacity of 2,830 lbs at 80 psi. Unlike most trailer tires this has an 81 mph speed rating which is much higher than most tires that are 65 mph rated.
view full answer...The Fastway Trailer Hitch Lock and Adjustment Pin Lock Set #FA86-00-3685 does not have a particular weight capacity. It has been designed for use with Fastway Flash E Series ball mounts like #FA42-00-2825. The lock set will fit 2-1/2" receivers…
view full answer...The Gen-Y Torsion 2-Ball Mount #325-GH-1824 that you referenced does now come with set screws on the sides of the square openings to allow the movement of the ball and retainer to be reduced. I attached a picture of them for you to check out. The…
view full answer...The Fastway Flash E Series Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 6" Drop, 7" Rise - 10K, #FA42-00-2600 you said you have is a fit for 2 inch hitch receivers not 2-1/2 inch hitch receivers. The Fastway Trailer Hitch Lock and…
view full answer...The B&W Tow & Stow 2-Ball Mount - 2-1/2" Hitch - 7-1/2" Drop/Rise - Black #BWTS20040B may have the correct rise/drop to tow your trailer level, but that will depend on the exact height of your trailer hitch receiver and the coupler…
view full answer...What I think you are asking, when you state correct height, is height of the ball mount on your 2021 Ram 2500. To choose the best adjustable ball mount for you need to determine the tallest rise and deepest drop you'll need. This will be the…
view full answer...The Equal-I-Zer part #EQ64FR that you referenced can fit trailer frames that are up to 8 inches tall so it would work great on your trailer frame that is 8 inches tall.
view full answer...Any given trailer tire fits on a range of wheel widths. A 225/75-15 tire will fit on 6, 6-1/2, and 7 inch wide wheels but not a 5-1/2 inch wide wheel. I have included a link to the 15 x 6 inch wheels that we carry that will accept tire size…
view full answer...Yes, 205/75R-15 is the most common trailer tire size for a 15 inch wheel with a 6 inch wide rim and a 5-on-4-1/2 inch bolt pattern, like #AM20537, which you referenced. I have included a link to a video review of this trailer wheel for you to check…
view full answer...The tire size ST225/75R15 is designed to fit 15 inch diameter wheels with a 6-7-1/2 inch width. The part #AM20534 that you referenced is a 15 inch wheel with a 6 inch width so in that regard it would work well. The bolt pattern of this wheel is 6 on…
view full answer...