Replacement Bearings for Dexter 8-222 Hub
Updated 04/19/2018 | Published 04/17/2018
Products Featured in This Question
Question:
Hi I have a trailer with Dexter 8-222 axles with welded on backing plates, the trailer has been sitting for awhile so I need to replace everything that is replaceable on these
asked by: Ben
Expert Reply:
I looked up your Dexter 8-222 Hub and was able to find the inner and outer bearing numbers as well as the grease seal used. It looks like this particular hub was designed for mobile homes and these, for the most part, have more unique bearings and bolt patterns because they are technically manufactured for one time use only and not meant to be altered or replaced.
Because of this, there is unfortunately not a 6 on 5-1/2 inch hub available that will be compatible with your trailer's axle spindle.
If you simply need replacement bearings and seals, you will use # L68149 for the inner and # LM67048 for the outer. For the Grease Seal you will need # 10-40.
If you need your assemblies functioning as well then it would be best to get a new axle since what you have is welded on and rusted to the point of near failure.
Product Page this Question was Asked From
Grease Seal - Single Lip - I.D. 1.938" / O.D. 2.510" for Mobile Home Utility Axle
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.94 Inch I.D.
- 2.51 Inch O.D.
- Redline
more information >
Continue Researching
- Search Results: l44649
- Search Results: l68149
- Search Results: grease seal
- Search Results: l68111
- Search Results: measure wheel bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Kenda Karrier KR35 ST205/75R15 LRD Radial Trailer Tire w/ 15" Nardo Gray Mod Wheel - 5 on 4-1/2
- Video: All About the Grease Seal
- Shop: Brake Controller
- Shop: Replacement Trailer Wheel Bearing - L68149 - Qty 1
- Shop: Grease Seal - Single Lip - I.D. 1.938" / O.D. 2.510" for Mobile Home Utility Axle
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-3/4 - Pre-Greased
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-3/4
- Video: Cleaning and Replacing Hubs and Bearings
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: Castle Nut Torque Spec for 3,500 Pound Axle
- Search Results: lm67048
- Q&A: Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings
- Q&A: Removing Titan Model 10 Master Cylinder on Welded A-Frame Actuator
- Q&A: Replacement Breakaway Lever for a Titan Model 20 Actuator
- Search Results: 7 wire junction box
- Q&A: Recommended Wire Gauge for Wiring Trailer Brakes
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Bearings Races Seals Caps
