Castle Nut Torque Spec for 3,500 Pound Axle
Updated 07/21/2022 | Published 07/20/2022
Question:
What should the wheel seal not be torque to on a 3500 pound axle
asked by: Ashley M
Expert Reply:
It sounds like you're asking about the torque spec for the castle nut on your 3,500 lb axle. There is no specific torque rating when installing the castle nut on any axle. You want to run the nut down until there is no side to side play in the hub, and then back it off to the next notch in the castle nut so the retainer can secure the nut. Over-tightening the castle nut can damage the bearings, races and spindle.
I have attached a video showing this process. If you jump to the 4:45 minute mark, you can see the procedure outlined above.
Product Page this Question was Asked From
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 7/16 Inch Diameter
- 5-1/2 Inch Long
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer bearings races seals caps
- Search Results: wheel bearing grease
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer tires and wheels
- Search Results: trailer plug
- Search Results: spring shackle kit single axle
- Search Results: hub and brake assembly
- Search Results: lippert trailer brakes
- Video: Installing the Double Lip Grease Seal for 3,500-lb Axles
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - Oil
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Review of Lippert Trailer Brakes - Electric 10 Inch L R Trailer Brake Assemblies ABS Hubs - LC73PX
- Shop: Lippert Brake Drum and Hub Kit - 3,500 lb Axles - 10" Diameter - 5 on 4-1/2 - 1/2" Studs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: Cleaning and Replacing Hubs and Bearings
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Q&A: Does etrailer Carry Black Lug Nuts
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: What Bearing Kit do I Need for My Lippert 3,500 Pound Axle with Serial Number S007855123?
- Q&A: Will a 4000-LB Leaf Spring Fit on a 3500-LB Axle
- Video: Remove and Reinstall a Trailer Hub Review
- Video: A Closer Look at the Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Article: Trailer Tire Sizing
- Q&A: How To Remove A Trailer Hub Cotter Pin
- Shop: Windshield Wiper Blades
on Trailer Suspension Parts
