Replacement Electric Brake Assemblies for Camper with AL-KO T52 Axles
Updated 04/09/2018 | Published 04/06/2018
Products Featured in This Question
Question:
Hi I have Al Ko T52 5,200 lb axles on my camper and cannot find al Ko brakes locally. The description for these brakes says they fit most major hub and axle assemblies. Does that include my axles? And if so are these the correct replacement brakes? Also it a a tandem axle trailer, should all 4 be replaced at the same time? Thank you!
asked by: Jay M
Expert Reply:
The Dexter Electric Trailer Brake Assemblys - Left Hand # 23-180 referenced in your question is rated for 7,000 pound axles. For the AL-KO T52 5,200 pound axles on your trailer, I instead recommend the etrailer.com Electric Trailer Brake Kit # AKEBRK-7-SA. These assemblies are designed for your 5,200 pound axles, measure 12 inches x 2 inches, and will indeed work with your AL-KO drums. You will just want to make sure the 5 bolt mounting pattern on these units match the pattern on your axle's mounting flange.
These self-adjusting brakes will also not require any periodic manual adjustments like standard brakes, and both the Left Hand and Right Hand assemblies are included. If you need just the Left Hand you can use # AKEBRK-7L-SA or for just the Right Hand # AKEBRK-7R-SA. I have attached a short installation video that you can also use for reference.
As long as the remaining brake assemblies on your trailer are in good working order, there is no reason you can't just replace the units in question. With that being said, brake assemblies should technically be wearing at the same rate, so if one or more assemblies are worn, most likely they are all worn. Replacing all the brakes on your trailer at the same time will also allow for a more routine maintenance schedule, rather than having to go back and forth to the shop (or replacing them at home) at more frequent intervals.
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Hub and Drum Assembly for AL-KO T-52 Axle
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Trailer Wiring
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Search Results: al ko 12x2 electric brake assembly
- Search Results: gen~y hitch gooseneck hitch
- Search Results: trailer brakes
- Search Results: gen~y hitch 5th wheel hitch
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Axle To Replace Older AL-KO 4400lb Axle # 402268
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - Qty 2
- Search Results: wheel bearings
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Shop: Dexter Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Q&A: Identifying AL-KO Axle Capacity on Tandem Axle Trailer
- Q&A: Replacement Double-Lip Grease Seals to Replace AL-KO 568862 or Hayes 09103304L
- Q&A: Can Bearing Buddy Fit on EZ Lube Spindle that has Zerk Fitting
- Q&A: Grease Seals for AL-KO T52 Axle with #42 Spindles and Bearings 25580 and 15123
- Q&A: Replacement Brake Assemblies for AL-KO 363233.1 and 363233.2 Brakes
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Video: How to Choose a Trailer Brake Controller
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
on Accessories and Parts
