Recommended TorkLift SuperHitch for a 2010 Dodge Ram 3500

Question

Question:

will this hitch fit my 2010 Dodge Ram 3500 Crew Cab single wheels?

asked by: Paul

0

Expert Reply:

I do have an option for you but the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLD1100 will not fit your 2010 Dodge Ram 3500. This hitch is only designed to fit a Dodge Ram 3500 from 1994-2002. Instead, I recommend using the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLD1101 if you do not have a factory hitch or part # TLD1102 if you do have a factory hitch.

If you also need the TorkLift SuperTruss and then you can use one of the following depending on the length needed.

21" - part # TLE1521

24" - part # TLE1524

28" - part # TLE1528

32" - part # TLE1532

36" - part # TLE1536

42" - part # TLE1542

48" - part # TLE1548

60" - part # TLE1560

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 9

Hey Cindy, thanks for reaching out. We may have an extension that will work for you. It will help to know exactly how long of an extension you are needing as this will be one of the main deciding factors. Let me know how long you need it to be in the…

view full answer...

Recommended TorkLift SuperHitch for a 2010 Dodge Ram 3500

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching