Torklift Hitch Recommendation for 2014 Ram 3500

Question

Question:

Will this fit 2014 Ram 3500, 4WD, SRW. Your data only says 2012.

asked by: Ron

0

Expert Reply:

We have a similar Torklift hitch that is a fit for your 2014 Ram 3500 but the # TLD1101 is only for older Ram trucks and would not work for you.

Instead you'd want the # TLD1108-30 which is the correct fit for your truck.

expert reply by: Jameson C

0

Answer 1

Since your factory hitch is bolted on and not welded on the correct Torklift hitch is the #TLD1102 and not the part.

view full answer...

Answer 2

Hey, Daniel! The TorkLift SuperTruss hitch extension's, like part #TLE1528, can only be used with the TorkLift SuperHitch. For your 2005 Dodge Ram Pickup you would need to pick up part #TLD1102 (if you have a 2500 and 3500 with a factory hitch)…

view full answer...

Answer 3

I do have an option for you but the TorkLift SuperHitch Original Trailer Hitch Receiver part #TLD1100 will not fit your 2010 Dodge Ram 3500. This hitch is only designed to fit a Dodge Ram 3500 from 1994-2002. Instead, I recommend using the TorkLift…

view full answer...

Answer 4

In order to use the TorkLift SuperTruss Hitch Extension part #TLE1548 on your 2006 Dodge Ram 3500 you will need to remove the factory hitch and install the TorkLift SuperHitch Original Trailer Hitch Receiver part #TLD1101. There are no other options…

view full answer...

Answer 5

The correct Torklift hitch for your 2012 Ram 2500 that has a bolted on factory trailer hitch is the part #TLD1101. We have confirmed this fit with Torklift so we know it will work. For Supertruss extensions we have three options. The part #TLE1536…

view full answer...

Answer 6

Hello Mark, Sounds like quite the sweet set-up you are getting together! For your 2008 Dodge Dually 3500 with super cab you will need one of the following (I like to assume everyone has a hitch on their truck, but you never know): - WITH hitch…

view full answer...

Answer 7

It sounds like you have a trailer hitch receiver already installed and need to add a second trailer hitch receiver for a double receiver to allow for the extension and tongue weight of your horse trailer. Because you don't have the factory hitch…

view full answer...

Answer 8

Yes, we have had customers come back and tell us that the TorkLift SuperHitch Original Trailer Hitch Receiver item #TLD1102 is compatible with a Hellwig Sway bar. I do not have any information on how this is accomplished. The TorkLift SuperHitch…

view full answer...

Answer 9

The Torklift SuperHitch part #TLD1101 that you referenced is compatible with the B and W gooseneck hitch #BWGNRK1308 you have installed in your 2007 Dodge Ram 3500. Then for an air bag kit that is compatible with both of the hitches mentioned we have…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Torklift Hitch Recommendation for 2014 Ram 3500

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching