Which Torklift Hitch Fits 2006 Dodge Ram with Factory Hitch that is Bolted On

Question

Question:

Can I use a TLD1102 with a factory bolt on hitch I could use the extra 2000 lbs capacity verses the 1101 model

asked by: Kenneth H

0

Expert Reply:

Since your factory hitch is bolted on and not welded on the correct Torklift hitch is the # TLD1102 and not the part.

expert reply by: Jameson C

0

Answer 1

While we haven't had the opportunity to install the Curt #C15809, Curt #C15704, and Draw-Tite #DT45509 hitches, from what I could see in the photos customers have sent in it looks like the Draw-Tite will actually sit right up next to the bumper…

view full answer...

Answer 2

In order to use the TorkLift SuperTruss Hitch Extension part #TLE1548 on your 2006 Dodge Ram 3500 you will need to remove the factory hitch and install the TorkLift SuperHitch Original Trailer Hitch Receiver part #TLD1101. There are no other options…

view full answer...

Answer 3

I have a solution for you but the Torklift superhitch item #TLF1002-30 fits Ford trucks. For your 2012 Dodge Ram 3500 we have a couple of options and it will depend on whether or not your truck has the factory hitch. If your Ram truck does not have…

view full answer...

Answer 4

The TorkLift SuperHitch Original Trailer Hitch Receiver #TLD1108 will only fit the 2013-2018 Ram 2500 and 3500 models. Your 2007 Dodge Ram 3500 will require the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLD1102-30 or Original #TLD1102. Both…

view full answer...

Answer 5

The distance from the top of the pin hole to the bottom of the steel plate for the Stake Pocket Tie-Down Anchors part #PK-SPTD is 1-3/4" which you can see in the attached photo.

view full answer...

Answer 6

Hey John, thanks for the information. To add a class V hitch to your 2005 Dodge Ram 3500 you'll want the Curt item #C15409 for a 2" receiver or item #C15809 for a 2-1/2" receiver. This hitch fits all models of the 2005 Ram with or…

view full answer...

Answer 7

Hey Wes, unfortunately it looks like the Hellwig Big Wig Rear Anti-Sway Bar #HE32RR is not intended to be used with Diesel engines so it's not going to work with your Dodge 2500. We do have a couple other options that don't say anything about…

view full answer...

Answer 8

Based on your picture the linkage from the frame to the sway bar would be in the way for Curt trailer hitch #C15409. But not to worry because there is a hitch that accounts for a Hellwig sway bar for a 2003 Dodge Ram 2500 with factory hitch. It is…

view full answer...

Answer 9

We have tie-downs that are compatible with the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"#TLD1102 that fits your 2011 Dodge Ram 3500, though Rear Tie-Downs #TLD3109 are not. The tie-downs compatible with the…

view full answer...

Answer 10

The Torklift #TLD41000 are designed to clear running boards, so they'd be the correct front tie-downs for you. The rear tie downs you'll need will depend on which hitch is currently on your truck. For a OEM hitch that has an open ended…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15809 is a great option for your 2011 Ram 2500 as long as you are okay with a 24 inch hitch extension like #C45048. This will give you a gross trailer weight of…

view full answer...

Answer 12

Hey Don, Curt does have a Class V hitch for your Ram but it sits super low so it's not going to be what you want. Draw-Tite offers Trailer Hitch Receiver #DT45509. It has a 2-1/2" receiver tube opening, 18,000lb gross towing weight/2,000lb…

view full answer...

Which Torklift Hitch Fits 2006 Dodge Ram with Factory Hitch that is Bolted On

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching