Timbren Suspension Kit Recommendation for 2016 Toyota Tundra with 1 inch Rear Lift

Question

Question:

I have a 2016 Toyota Tundra with 3in lift in front and 1in in back, leveling kit. What is the height for the TTORTUN4 or TTORTUN4L? In your opinion is this the best option?

asked by: Steve

1

Helpful Expert Reply:

For a Timbren kit confirmed to fit your 2016 Toyota Tundra you'd want the part # TTORTUN4 with the 1 inch spacer # A25723-90AH00 since you have a 1 inch lift at the rear of your truck.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Since you are towing a travel trailer, you are going to want to use a Timbren system that enhances your rear suspension. Should your 2010 Nissan Titan be a 4 wheel drive model you would want #TNRTTN, and for 2 wheel drive models you'd want…

view full answer...

Answer 2

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

view full answer...

Answer 3

When installing any Timbren system on the 2019 Toyota Tacoma you should have about 1/2" to 1-1/2" between the frame and the spring after installation. You won't necessarily be losing wheel travel when you use a Timbren Rear Suspension…

view full answer...

Answer 4

The Timbren Rear Suspension Enhancement System #TTORTUN4 isn't just a good option for your 2019 Toyota Tundra, it is a great option because they will improve your truck's handling and performance, offering your suspension the support it needs…

view full answer...

Answer 5

It looks like your 2021 Nissan Titan has a bump stop that will need to be removed before you install the Timbren Rear Suspension Enhancement System item #TTORTUN4. I have linked the installation instructions to show you how the Timbren System…

view full answer...

Answer 6

Sorry to hear about your dissatisfaction with the Timbren #TTORTUN4 on your 2018 Toyota Tacoma. They are hollow rubber springs and can create a bumpy ride when you have a load on the truck and go over speed bumps. As for the RoadActive Suspension…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Timbren Suspension Kit Recommendation for 2016 Toyota Tundra with 1 inch Rear Lift

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching