Installation Hardware for Global Link Vise Lock Door Latch

Question

Question:

Do you sell the self tapping screws for the Global Link Vise Lock for Cam-Action Door Latch?

asked by: Emmett C

0

Expert Reply:

To install the Global Link Vise Lock for Cam-Action Door Latch # 295-000024 you can use the Self-Tapping Screw - 1/4" -14 x 3/4" Long - Zinc # FA1131822.

expert reply by: Erik B

0

Answer 1

The "hidden" in the Master Lock Hidden Padlock #ML6271 is referring to the shackle/bar being fully hidden from view and is completely inaccessible when the lock is attached and secured. This makes it significantly more difficult to remove…

view full answer...

Answer 2

The Global Link Vise Lock for Cam-Action Door #295-000024 does NOT include installation hardware so you can select that locally. I suggest stainless or galvanized 6mm diameter hardware that is usually available at any full-service hardware store.…

view full answer...

Answer 3

The Global Link Vise Lock for Cam-Action Door #295-000024 does not include installation hardware but you can source it from your local hardware store. I suggest stainless or galvanized 6mm diameter bolts or self tapping screws that is usually…

view full answer...

Answer 4

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

view full answer...

Answer 5

Hey Terry, you’re likely not doing anything wrong. The Force #PA96VR has wide 6-1/2” tires that give great traction, but they don’t pivot sharply. For tight angle turns, it helps to alternate between forward and reverse, “walking” the tongue in…

view full answer...

Answer 6

Hello Richard, thanks for reaching out. Yes, the Replacement Plastic Check Valve for B&B Molders City Water Inlet #BM98GR will indeed work with the B&B Nautilus P4 RV Water Control Panel. The check valve works with all of the B&B panels,…

view full answer...

Answer 7

Hey Will, thanks for reaching out. What I recommend for replacing your 7-way is the following: - etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector #e99011 Wiring your connections thru the junction box helps keep them…

view full answer...

Answer 8

The mounting holes for the Bauer Products Locking Cam Latch #BA32FR are spread 2-13/16" horizontally for the top 2 holes and 3-3/4" from the center line of the top holes to the center of the bottom hole(see image). The mounting holes for…

view full answer...

Answer 9

The Global Link Vise Lock you'd mentioned, part #295-000024 would be a good addition, but it would only replace the puck-style lock you'd used. You'll still need to replace the latch kit with something like part #PLR658-SSP. From your…

view full answer...

Answer 10

Global Link Vise Lock #295-000024 is sold in quantities of 1. But if you select the keyed alike option (the default is keyed unique) and change the quantity to 2 then you will receive 2 of the locks keyed the same.

view full answer...

Answer 11

Hey Aaron, it sounds like you're looking for the Tamper-Proof Door Latch w/ 55" Pipe for Enclosed Trailers #ABS49FR. This lock bar assembly measures 55" long and has a rust and corrosion resistant coating. Let me know below if there is…

view full answer...

Installation Hardware for Global Link Vise Lock Door Latch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching