Will Tow Ready No-Drill Mount Bracket Work on Draw-Tite Class III Hitch for 2007 Volvo XC90

Question

Question:

Does this part match up with the Draw-tite receiver hitch #75152 that I purchased from you last year?

asked by: Pete

0

Expert Reply:

The Tow Ready No-Drill Bracket - Short # 18140 referenced in your question will provide an excellent solution for attaching a connector bracket and connector to the Draw-Tite Class III Hitch # 75152 you have installed on your Volvo XC90. This will give you a really nice connector bracket that doesn't require any drilling into the hitch. It is indeed compatible with this hitch and your vehicle.

If you do happen to have a 7-Way, you may want to go with the Long version of the bracket, part # 18136. This will just give you a bit more room to work with, as it will move the connector a little further out from the hitch.

I have attached a short video demonstration on this product so you can see exactly how it works.

expert reply by: Chris R

0

Answer 1

Installing a trailer hitch on your 2004 Volvo XC90 is not a huge project by any means. To install a hitch like the Draw Tite hitch that fits your vehicle part #75152 is relatively very easy. I attached an install video that shows this hitch installed…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Will Tow Ready No-Drill Mount Bracket Work on Draw-Tite Class III Hitch for 2007 Volvo XC90

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching